1) transformation toughening mecha-nism
相变增韧机理
2) transformation toughening
相变增韧
1.
The transformation toughening of AT30 and the study on their abrasive wear properties;
AT30金属陶瓷的相变增韧及其对磨粒磨损性能研究
2.
The transformation toughening,mechanisms are surveyed for ZrO 2 ceramics and introduces its types, properties,application in ceramics and other industrial fields.
综合论述了国内外对ZrO2 陶瓷的相变增韧机理的研究 ,介绍了ZrO2 陶瓷的类型和性能以及在陶瓷和其它工业领域的应用前景。
3.
Microcrack toughening and some degree of transformation tougheninghave been achieved by varying amounts of Y_2O_3 addition to adjust the degrees of t-ZrO_2 stabilizationin zirconia toughened mullite (ZTM) composites.
调节氧化锆相中稳定剂Y_2O_3的固溶量可在ZTM复合材料中实现微裂纹增韧和一定程度的相变增韧。
3) phase transformation toughening
相变增韧
1.
Mechanism of strengthening and toughening of ZTA ceramic nanocomposites was summarized in this article, which include dispersion strengthening, phase transformation toughening, tiny crack toughening, among them ,mechanism of dispersion strengthening comprising intragranular toughening and intergranular toughening.
包括 :弥散增韧机理、相变增韧机理、微裂纹增韧机理三种机理 ,其中弥散增韧机理又包括“内晶型”增韧机理和“晶界型”增韧机理两
2.
The interaction of whisker reninforcing and phase transformation toughening in the matrix when combining this two toughening techniques is analyzed on the basis of reviewing the mechanisms of whisker reinforcing and phase transformation toughening and the effects of oxide ceramics toughened by thecombined toughening technique in the civil and abroad are summarized in this paper.
在综述陶资材料晶须增韧和相变增韧机制的基础上，分析了晶须增韧和相变增韧复合时的相互作用，并介绍了国内外利用复合增韧法韧化氧化物陶瓷的研究结果，同时指出了存在的问题和获得优良复合增韧效果的有效途径。
4) toughening mechanism
增韧机理
1.
Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend;
低摩尔质量PC/PP共混体系的增韧机理研究
2.
Study on Toughening Mechanism of Co-crosslinked PP/LLDPE/SBS Blends;
PP/LLDPE/SBS交联共混体系增韧机理的研究
3.
This paper introduces the present situation of toughening modification of epoxy resin adhesive and recommends the typical toughening mechanisms and the applications of epoxy adhesive.
综述了近几年环氧树脂胶粘剂增韧改性研究的现状,介绍了各种增韧机理及应用。
6) toughening mechanisms
增韧机理
1.
Appearance of fracture and toughening mechanisms of Ti(C,N)-based cermets;
Ti(C,N)基金属陶瓷断口形貌及增韧机理
2.
The toughening mechanisms of this composite were simply discussed.
综述了目前UPR/纳米SiO2复合材料的制备方法,包括原位聚合法、共混法、分子自组装及组装法,介绍了UPR/纳米SiO2复合材料的优异性能,并对其增韧机理作了探讨。
3.
The development of the super fine grain-ceramics in Si-Al-Zr-O system with high content of ZrO_2 is introduced in this paper;The chemical composition designing,method of preparation and toughening mechanisms are discussed;The current status and the latest progress are reviewed.
介绍了锆系微晶陶瓷的发展历程,着重阐述了其成分选择、制备方法和增韧机理,并报道了该系微晶陶瓷的最新近展,展望了其发展趋势。
补充资料：氧化锆相变增韧陶瓷
分子式：
CAS号：
性质：一种利用氧化锆马氏体相变效应来改善脆性的陶瓷。氧化锆在由四方相向单斜相转变时(即马氏体相变)，伴随体积和形状变化。能吸收能量，减缓裂纹尖端的应力集中，阻止裂纹扩展，从而提高材料韧性，包括应力诱导相变增韧、裂纹弯曲增韧和微裂纹增韧。分为稳定氧化锆陶瓷(PSZ)、四方氧化锆多晶体陶瓷(TZP)和氧化锆增韧陶瓷(ZTC)三种。用于增强陶瓷基和金属基复合材料韧性。
CAS号：
性质：一种利用氧化锆马氏体相变效应来改善脆性的陶瓷。氧化锆在由四方相向单斜相转变时(即马氏体相变)，伴随体积和形状变化。能吸收能量，减缓裂纹尖端的应力集中，阻止裂纹扩展，从而提高材料韧性，包括应力诱导相变增韧、裂纹弯曲增韧和微裂纹增韧。分为稳定氧化锆陶瓷(PSZ)、四方氧化锆多晶体陶瓷(TZP)和氧化锆增韧陶瓷(ZTC)三种。用于增强陶瓷基和金属基复合材料韧性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条