1) mechanical property
力学性能
1.
Effect of fiber content on mechanical property and fracture mechanisms of Cf/SiC composites;
纤维含量对C_f/SiC复合材料力学性能和断裂机理的影响
2.
Analysis of mechanical property of screw drilling and perforated casing in openhole completion;
裸眼完井中螺旋钻孔-射孔套管力学性能分析
3.
Thermal stability and mechanical property of hollow fiber polypropylene membrane modified by cysteine;
半胱氨酸改性聚丙烯膜的热稳定性与力学性能
2) mechanical properties
力学性能
1.
Study on preparation and mechanical properties of La_2O_3-TiC/W composite;
La_2O_3-TiC/W复合材料的制备与力学性能研究
2.
Relationship Between Mechanical Properties and Porosity in ADC12 Die Castings;
ADC12压铸件孔洞与力学性能关系的研究
3.
Effects of Nd on Microstructure and Mechanical Properties of Mg-4Al-1Sr Alloy;
Nd对Mg-4Al-1Sr合金显微组织及力学性能的影响
3) electrical property
电学性能
1.
Technological parameters and electrical property of TiN thin films grown processing by magnetron sputtering
磁控溅射TiN薄膜的工艺及电学性能研究
2.
With the different heat treatment,the electrical property of a new Cu-based Alloy contact terminal material is studied.
本文主要对一种新型铜基电触头材料不同热处理工艺下的电学性能进行了探讨。
4) magnetic property
磁学性能
1.
The investigations have been made on the preparation process, starting crystallization temperature, curie temperature and magnetic property of cobalt base and iron-nickel base amorphous soft magnetic alloys.
研究了钴基和铁镍基两种非晶态软磁合金薄带的制备工艺,用示差热分析法测量了合金的起始晶化温度和居里温度,用冲击检流计法测量了合金的静态磁学性能。
2.
Whereas the study on magnetic property of Co-Cu-B alloy powder was most infrequency in material field.
然而材料界对Co-Cu-B合金粉末磁学性能的研究却尚未见报道。
3.
The results indicate that the NiZnCo ferrite films were deposited on Si andα-Al_2O_3 substrates by 900℃-thermal decomposition of LDHs with the initial molar ratio of Co~(2+)/Zn~(2+)of 3/1,2/2 and 1/3,respectively,and the NiZnCo ferrite film crystal granular exhibits good magnetic property.
通过对LDHs前驱体组成、焙烧温度等制备工艺参数的调控,得到了具有特殊表面形貌及优异磁学性能的NiZnCo铁氧体薄膜材料。
5) optical properties
光学性能
1.
Facile preparation and optical properties of silver chromateassembly structure from nanorods;
铬酸银纳米棒组装体的简易合成及其光学性能
2.
Preparation and optical properties of ZnO/epoxy nanocomposites;
氧化锌/环氧纳米复合材料的制备及其光学性能研究
3.
Effects of surface modification on dispersion of nano-CdS in polymers and their optical properties;
修饰纳米CdS/聚合物的界面相互作用与光学性能
6) mechanical performance
力学性能
1.
Influence of fillers on the mechanical performance of epoxy resin mold materials;
填料对环氧树脂模具材料力学性能的影响
2.
Influence of injection conditions on mechanical performance of polyamide-6;
不同注射条件对尼龙6力学性能的影响(英文)
3.
Study of mechanical performance of liquid die forging SiCp/ZL201 compound materials;
液态模锻SiCp/ZL201复合材料力学性能研究
补充资料:一般力学
一般力学 general mechanics 研究牛顿力学(见经典力学)的一般原理和一切宏观离散系统的力学现象。力学的分支。包括静力学、运动学和以牛顿力学为基础的一切离散系统的动力学;此外,还研究某些与现代工程技术有关的学科,如陀螺力学、振动理论、运动稳定性理论、自动控制论、机器人动力学等。连续介质力学(见理性力学)通常不纳入一般力学范畴 。一般力学的研究对象是4种力学模型:质点、质点系、刚体、多刚体系统。以牛顿运动定律或与其等价的其他力学原理为基础建立的动力学基本方程,如牛顿方程、拉格朗日方程,正则方程是研究一般力学的基础。将这些方程应用于离散系统,都得到常微分方程,求解时须用初始条件。另外,还可直接从力学的变分原理出发,用寻求极值的方法求得问题的解。天体力学的研究对象和研究方法是一般力学的根源,所以天体力学的基础理论也包括在一般力学之中。 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条