1) Vacuum spurting deposition
真空喷射沉积
1.
Vacuum spurting deposition was developed to grow Zn nano-particle thin films.
利用真空喷射沉积技术制备厂Zn纳米颗粒薄膜，研究了工艺参数对薄膜形貌及晶体结构的影响规律，给出了颗粒尺度和外形随Ar气流量、蒸发源温度、喷嘴尺寸形状和沉积时间的变化规律，并对其机理进行了分析。
2) spray deposition
喷射沉积
1.
Application of spray deposition technology in aluminum-silicon electronic;
喷射沉积技术在Al-Si电子封装材料中的应用
2.
Numerical simulation for preparing φ520/φ460 mm pipe of spray deposition heat-resistant alunimun alloy;
非致密喷射沉积耐热铝合金锭坯制备φ520/φ460mm管材过程数值模拟
3.
Microstructure and corrosion resistance of spray deposition ZA35 Alloy;
喷射沉积ZA35合金组织与耐蚀性
3) spray-deposition
喷射沉积
1.
5Cu-1Mg-1V alloy was prepared by spray-deposition technology,a kind of rapid solidification.
采用喷射沉积快速凝固技术制备了Al-17Si-5Fe-2Mn-2Ni-3。
2.
5Cu-1Mg-1V alloy was prepared by spray-deposition technology.
针对快速凝固技术可以有效地改变高硅铝合金中初晶硅的形态和尺寸,显著改善合金的使用性能的特点,采用喷射沉积快速凝固技术制备了Al-17Si-5Fe-2Mn-2Ni-3。
3.
As an advanced materials preparation technology,spray-deposition has shown remarkable superiority in producing large-sized alloys and metal matrix composites.
坩埚移动式喷射沉积技术作为一种先进的材料制备新技术,在制备大尺寸合金及金属基复合材料方面具有显著的优越性。
4) Spraying Deposition
喷射沉积
1.
Microstructure of Spraying Deposition Forming Zn-Al Alloy;
喷射沉积锌铝合金原始沉积坯组织形貌研究
2.
The rough blank of Si-Al alloy is prepared by self-made spraying deposition apparatus, the texture of rough blank and the structure evolution after solid solution treatment are analyzed, and the properties for stretching, abrasion and surface-hardness are determined.
用自行研制的喷射装置制备硅铝合金坯体 ,分析喷射沉积坯体的组织结构及固溶处理后的组织变化 ,测试对热挤压后坯件拉伸、表面硬度、耐磨等性能。
3.
Silver thick film conductor was fabricated directly on ceramic substrate by micro-atomization(Microjet) spraying deposition.
采用微细雾化喷射沉积直写的方法在陶瓷基板上制备银厚膜导体。
5) spray forming
喷射沉积
1.
Factors influencing spray forming and control of getting the needed deposition;
喷射沉积的影响因素及沉积体性能控制
2.
Therefore,some specia l processing techniques such as rapid solidification,spray forming have been developed due to grain refinement to improve the poor workability.
采用快速凝固、喷射沉积技术制备镁合金,可细化合金的晶粒,改善其变形能力,是获得高性能镁合金材料的最佳选择。
3.
Developments in spray forming and applications of precious metals are summarized.
综述了喷射沉积技术的发展及贵金属材料的应用。
6) Vacuum deposition
真空沉积
1.
A new Parylene C coatings was prepared by vacuum deposition process.
用真空沉积技术制备了聚氯代对二甲苯(Parylene C)涂膜,考核了聚氯代对二甲苯涂膜与特种材料的附着力及涂膜的拉伸性能、耐化学介质性能、表面抗静电性能,并对具有复杂形状的工件表面进行均匀涂覆作了探索研究。
2.
The effect of neodymium on the silver nanoparticles prepared by vacuum deposition has been studied by TEM, EDX, HEED and XRD.
稀土元素作为微米级晶粒细化剂在有色和黑色金属工业中已经得到广泛应用,试验采用TEM,EDX,HEED和XRD方法研究了稀土钕对真空沉积的纳米级银粒子的细化作用。
3.
The article introduces the importancethe of three proofings technology in the national defense industry , explained parylene coat ’s vacuum deposition mechanism , excellent application performance ,and limitations of the coating technology.
介绍三防技术在国防工业中的重要性,分析Parylene涂层的真空沉积机理、优异的使用性能及其涂敷工艺的局限
补充资料：喷射真空泵
分子式：
CAS号：
性质：用于抽真空的一种蒸汽喷射泵。单级仅能达到有限的真空度。为获得更高的真空度，可采用多级。
CAS号：
性质：用于抽真空的一种蒸汽喷射泵。单级仅能达到有限的真空度。为获得更高的真空度，可采用多级。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条