1) silicon nitride ceramics/stress strain relation
氮化硅陶瓷/应力-应变关系
2) silicon nitride ceramics
氮化硅陶瓷
1.
As a new type tool material, the excellent capabilities of silicon nitride ceramics cutting tools ravel out many cutting problems of super hard materials.
氮化硅陶瓷是一种新型刀具材料,其优良的切削性能解决了超硬材料的加工难题。
2.
The dielectric property of silicon nitride ceramics was measured at 10.
通过添加烧结助剂,采用常压烧结工艺制备出不同气孔率(19%～54%)的氮化硅陶瓷。
3.
Silicon nitride ceramics is a sort of material of high temperature and high intensity structure which have been developed since 1950s.
氮化硅陶瓷是50年代发展起来的一种高温高强结构材料,由于其优异的高温力学性能和化学稳定性,在现代制造业中发挥着越来越重要的作用。
3) silicon nitride ceramic
氮化硅陶瓷
1.
However,it is difficult to make silicon nitride ceramic parts.
氮化硅作为高温功能陶瓷性能优越,但将其制备成陶瓷零件比较困难,目前一般用反应烧结法制备氮化硅陶瓷零件。
2.
In the paper, the dispersion of nano-Si3N4 powder, the influence of different nano-Si3N4 concentration on silicon nitride mechanical properties, the influence of the different nano-Si3N4 concentration on silicon nitride ceramic using properties, th.
本文以亚微米级氮化硅为起始原料,加入纳米氮化硅来增强基体,添加氧化铝和氧化钇为烧结助剂,等静压成型,采用无压烧结的方式来制备具有优良性能的氮化硅陶瓷。
3.
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
4) silicon nitride
氮化硅陶瓷
1.
Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature.
用高能量密度脉冲等离子体于室温下在氮化硅陶瓷刀具上成功沉积了高硬耐磨的氮化钛涂层。
2.
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.
研究了保温时间对气压烧结(GPS)氮化硅陶瓷晶界相及力学性能的影响。
5) Si 3N 4 ceramics
氮化硅陶瓷
1.
Bonding of Si 3N 4 ceramics was performed with Y 2O 3 Al 2O 3 SiO 2(YAS) X glass solders, which were mixed with TiO 2 (YT) and Si 3N 4(YN) respectively.
在Y2 O3 Al2 O3 SiO2 (YAS)钎料中添加TiO2 (YT)和Si3N4(YN) ,并进行氮化硅陶瓷的连接。
2.
Si 3N 4 ceramics die was prepared by the method of reaction bond,and tests of drawing stainless steel (SUS304) with ceramics die lubricated with water base drawing lubricator have been carried out in YA-100 type drawing machine with four columns.
用反应烧结方法制备氮化硅陶瓷材料模具 ,然后将其安装在YA - 1 0 0型四柱液压拉深机上进行拉深不锈钢实验。
6) Si_3N_4 ceramics
氮化硅陶瓷
1.
The test for laser of Si_3N_4 ceramics by CW CO_2 laser processing system is reported.
报导用连续波ＣＯ_２激光加工机对氮化硅陶瓷的激光打孔试验，获得了深径比达１８。
补充资料：氮化硅陶瓷
分子式：
CAS号：
性质：一种非氧化物陶瓷以四氮化三硅为主要成分。具有高强度、高弹性模量、耐磨、耐蚀、抗氧化等优良性能。莫氏硬度9。Si3N4是共价键化合物，属六方晶系，存在α型和β型两种晶型。Si-N间的键合强度高，为难烧结物质。氮化硅粉通常由硅粉氮化法获得。采用反应烧结、热压烧结、高温高压氮气氛烧结、热等静压烧结等方法将氮化硅粉烧结制得。氮化硅陶瓷性能与其制备方法密切相关，一般室温强度可达700～1000MPa，高温强度受晶界玻璃相影响。氮化硅陶瓷的优异性能使其在许多领域得到应用并有许多潜在的用途。在陶瓷发动机中，用来制备定子、转子、蜗形管等部件。在冶金、化学、机械、电子和军事工业上也有广泛的应用。
CAS号：
性质：一种非氧化物陶瓷以四氮化三硅为主要成分。具有高强度、高弹性模量、耐磨、耐蚀、抗氧化等优良性能。莫氏硬度9。Si3N4是共价键化合物，属六方晶系，存在α型和β型两种晶型。Si-N间的键合强度高，为难烧结物质。氮化硅粉通常由硅粉氮化法获得。采用反应烧结、热压烧结、高温高压氮气氛烧结、热等静压烧结等方法将氮化硅粉烧结制得。氮化硅陶瓷性能与其制备方法密切相关，一般室温强度可达700～1000MPa，高温强度受晶界玻璃相影响。氮化硅陶瓷的优异性能使其在许多领域得到应用并有许多潜在的用途。在陶瓷发动机中，用来制备定子、转子、蜗形管等部件。在冶金、化学、机械、电子和军事工业上也有广泛的应用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条