1) Suitable-ther-mal-decomposition
浅度热分解
2) thermal decomposition temperature
热分解温度
1.
The thermal decomposition temperature of the CPVC products in different conditions is compared.
对溶液氯化法生产过氯乙烯(CPVC)中影响产品质量的工艺参数进行了实验研究,比较了不同条件下制得的CPVC产品的热分解温度,确定了较适宜的工艺条件,提出实际生产装置中可以优化的工艺参数。
2.
The result showed that the thermal decomposition temperature of chlorinated paraffin reached 133 ℃ by adding 0.
3%时,氯化石蜡的热分解温度为133℃,比单独使用乙二醇二缩水甘油醚提高了15℃,热稳定效果较好。
3.
It is deduced from the bonding parameter topological index He that a quantitative relationship must be existed between He and the thermal decomposition temperature of some sulfates.
从键参数拓扑指数一般形式出发 ,导出计算硫酸盐键参数拓扑指数公式 ,用于关联硫酸盐热分解温度的计算 ,结果满
3) temperature of thermal decomposition
热分解温度
1.
*" The CpT relationship, temperature of glassing Tg, temperature of melt Tm, and temperature of thermal decomposition Td of polyether sulphone (PES) are obtained by lowtemperature adiabalic cacorimeter (LAC), thermogravimetry (TG), derivative thermogravimetry (DTG), differentiate thermal analysis (DTA), and useful data are provided for the processing, modification and application of PES.
用低温绝热量热、DTA、TG等方法测量了PES的热化学行为,得到了基聚醚砜(PES)低温下的Cp T曲线、玻璃化温度(tg)、熔融温度(tm)及热分解温度(td),从而为PES这种高分子材料的加工、改性及应用提供了热化学方面的基础数据。
2.
Based on the analysis of the amino acid composition, the temperature of thermal decomposition and the molecular structure of sericin dissolved from cocoon layer in hot water, it showed that the content of acidic amino acids in sericin protein was decreased slightly with the time in hot water because of its solubility.
对不同时间热水溶出的茧层丝胶的氨基酸组成、热分解温度和分子结构等进行了测定分析。
4) decomposition temperature
热分解温度
1.
After curing at 280℃/1h, the decomposition temperature of TMI is 527℃.
以四元芳香族胺类化合物及顺丁烯二酸酐为原料合成了一种可溶于丙酮，微溶于乙酸乙酯的四马来酰亚胺（ＴＭＩ），２８０℃固化１ｈ，其热分解温度达５２７℃，并且有良好的工艺性能和力学性能。
5) adiabatic decompossition temperature
绝热分解温度
6) pyrolysis temperature
热解温度
1.
Effect of pyrolysis temperature on pyrolysate during fast pyrolysis of industrial lignin made by acid precipitation;
热解温度对酸沉淀工业木质素快速热解液体产物的影响
2.
By controlling only pyrolysis temperature of Fe(CO)5, polycrystalline iron fibers with tunable structure and chemical compositions were prepared by carrier gas flow induced method.
仅通过控制Fe(CO)5的热解温度(Td),用气流诱导法制备了化学组成与结构可控的多晶铁纤维。
3.
The change of final pyrolysis temperature,characteristic of waste,rate of gas yield and the key element of gas calorific value were studied in detail.
结果表明:实用热解设备的产气率高,理想热解温度在700℃以下。
补充资料：废塑料热分解
分子式：
CAS号：
性质：已是废塑料的一种化学回收技术，即将废塑料在隔绝空气条件下加热或水解，使高聚物裂解成低分子物质。如在催化剂作用裂解废塑料可得到汽油、煤油、柴油馏分及部分气体等。对PE，PP等塑料废弃物用此技术可方便地处理而对聚酯、聚碳酸酯等缩聚物可进行水解得到原料或中间体。
CAS号：
性质：已是废塑料的一种化学回收技术，即将废塑料在隔绝空气条件下加热或水解，使高聚物裂解成低分子物质。如在催化剂作用裂解废塑料可得到汽油、煤油、柴油馏分及部分气体等。对PE，PP等塑料废弃物用此技术可方便地处理而对聚酯、聚碳酸酯等缩聚物可进行水解得到原料或中间体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条