1) ultrafinepowders
超细粉未
2) superfine powder
超细粉体
1.
Application of superfine powder technology in TCM;
超细粉体技术在中药行业中的应用
2.
Rheological behavior of PET blend-modified with TiO_2/ZnO superfine powder
TiO_2/ZnO超细粉体共混改性PET的流变性能
3.
The sub-micro superfine powder of codonopsis pilosula(Franch) Nannf are produced by pulverizer of turbulence,and several elements affecting the diameters of superfine powder are researched at the same time,such as the speed of impeller,the quality of reinforced material and the working time.
利用湍流超细粉碎机制取了党参的亚微米级超细粉体,研究了叶轮转速、加料质量、粉碎时间对粉体粒径的影响,对党参的超细粉碎工艺参数进行了优化;分析了造成粉体团聚的原因,结果表明,叶轮转速的提高是引起粉体团聚的主要因素。
3) ultrafine powder
超细粉体
1.
Preparation of ultrafine powder TiO2 particles by homogeneous precipitation method under boiling reflux conditions;
沸腾回流均相沉淀法合成超细粉体TiO_2
2.
Effect of precipitant on the morphology and performances of ultrafine powder CuO;
沉淀剂对CuO超细粉体形态与性能的影响
3.
Features of Liquid-continuous impinging streams and their Applications in preparation of ultrafine powders;
液体连续相撞击流特性及其在超细粉体制备中的应用
4) micro-pulverized coal
超细煤粉
1.
Dependence of coal compositions on micro-pulverized coal fineness;
超细煤粉粒度对煤质分析特性的影响
2.
Numerical simulation of effect of coal particle size on NO_x reduction in micro-pulverized coal reburning;
煤粉粒度对超细煤粉再燃脱硝效率影响的数值模拟
3.
Study on ignition characteristics of micro-pulverized coal by thermogravimetry;
超细煤粉着火特性的热重分析
5) ultrafine copper powder
超细铜粉
1.
Preparation of ultrafine copper powder with hydrazine hydrate as reducing agent;
水合肼为还原剂制备超细铜粉的研究
2.
Because of special physical and chemical properties, ultrafine copper powders have been used in many kinds of fields, such as conduction materials, catalysts, lubricant addition, nanocrystalline copper materials, medicine and so on.
超细铜粉由于其特殊的物理、化学方面的性质已经广泛应用于导电材料、催化、润滑油添加剂、纳米晶铜、医药等多个领域中。
3.
The activation pretreatment of copper concentrate has been done by high energy ball mill,and ultrafine copper powder with average size less than 10 μm has been prepared by directly using copper concentrate and ultrasonic slurry electrolysis.
采用高能球磨对铜精矿进行活化预处理,并通过超声场辅助矿浆电解的方法直接利用铜精矿制备出平均粒度小于10μm的超细铜粉。
6) ultra-fine grinding
超细粉碎
1.
Progress of ultra-fine grinding and classifying techniques in China;
中国超细粉碎和精细分级技术现状及发展
2.
Through experimental studies on ultra-fine grinding of molybdenite,it can be found that there is the effect of density in grinding,the ratio of ball to ore,ball distribution,rotating speed of mill, the consumption of dispersant,grinding time on grinding process.
对润滑剂级辉钼矿进行超细粉碎研究,研究了磨矿浓度、球矿比、球径配比、搅拌转速、水溶分散剂用量、磨矿时间对超细磨矿结果的影响。
3.
The present states of the ultra-fine grinding technology and equipment for non-metallic ores are reviewed in recent years in China.
综述了我国近年来非金属矿超细粉碎技术和设备的发展现状 ,指出了制约国内技术和设备发展的几个问题 ,结合超细粉体粒子微细化、表面活性化、用途功能化、组成高纯化、产品系列化的性能要求 ,提出了我国超细粉碎技术今后的发展方向。
补充资料：染料细粉及超细粉
分子式：
CAS号：
性质：非水溶性染料或不易溶染料常采用的剂型。如分散染料、还原染料等对粒度及粒度分布均有一定要求，要求相对集中，过细、过粗，均对使用有不良影响。染料生产企业对本企业的产品均作了规定。这些染料产品一般多在2μm到上到4μm范围内，如对某些分散染料要求控制在1μm左右，分散性能4～5级，还原染料也与分散染料近似，故有超细粉之称。为使染料产品达到上述细度，常采用万能粉碎机或砂磨、球磨等进行粉碎。
CAS号：
性质：非水溶性染料或不易溶染料常采用的剂型。如分散染料、还原染料等对粒度及粒度分布均有一定要求，要求相对集中，过细、过粗，均对使用有不良影响。染料生产企业对本企业的产品均作了规定。这些染料产品一般多在2μm到上到4μm范围内，如对某些分散染料要求控制在1μm左右，分散性能4～5级，还原染料也与分散染料近似，故有超细粉之称。为使染料产品达到上述细度，常采用万能粉碎机或砂磨、球磨等进行粉碎。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条