1) Shearing clearance
剪切间隙
2) Shear straw without gap between blade-s
无隙剪切
3) knife gap
剪刃间隙
1.
How to select knife gap of slitting DSS for plate 45~# with high strength is analyzed to assure the shearing quality and to prolong service life and the formula for knife gap regulating has been derived during application.
本文对滚切式双边剪剪切高强度钢(45#钢)剪刃间隙如何选择进行了分析。
2.
With development of the industrial control system,programmable logic controller(PLC) is widely used in dividing shear of Baosteel Heavy Plate Mill(HPM),especially in the fields of the main motor control of dividing shear,collection and analysis of PDA data,control of pinch rolls, adjustment control of knife gaps,shearing process control,etc.
随着工业控制系统的不断发展,可编程控制器在宝钢分公司厚板厂定尺剪系统中得到了全新的应用,尤其在定尺剪的主电机控制、PDA数据采集和分析、夹送辊控制、剪刃间隙调整控制、剪切过程控制等方面得到了应用。
3.
,and the knife gap is one of the key factors that effect the cutting qualities.
滚切式双边剪是宝钢厚板厂切边的主要设备,其剪刃间隙与边部质量的好坏关系密切。
4) blade clearance
剪刃间隙
1.
Optimizing the parameters of shearing lengths,shearing accuracy,blade clearance and pressure plate mechanism,so as to improve the shearing quality of steel plates.
通过对飞剪剪切长度,精度,剪刃间隙和压板机构等参数的优化,来提高钢板的剪切质量。
5) blade gap
剪刃间隙
1.
Study of the experimental formula of the blade gap adjustment for rotary cutting shear;
滚切式剪机剪刃间隙调整经验公式的探讨
2.
Research on the formula for blade gap regulating of slitting double-sided shear and length shear;
滚切式双边剪和定尺剪剪刃间隙调整公式探讨
3.
,in cutting process there are some problems,such as,blade gap adjustment is not accurate,automation level of clamp and width adjustment of whole equipment are not high.
福建三钢(集团)有限责任公司中板厂圆盘剪控制系统剪切过程中,存在着剪刃间隙调整精度不准和压紧装置、设备整体调宽运行自动化程度不高的问题,通过深入分析发现,造成问题的原因是系统程序不完善及剪刃间隙与钢板厚度设定不合理,因此采取了以下改进措施:正确确定剪刃间隙与钢板厚度的关系、完善压紧装置的控制方式、增加整体剪切宽度自动同步调整的功能,改进后运行效果较好。
6) interlaminar shear
层间剪切
1.
The curves showing the relationship between the strength of the ultrahigh molecular weight polyethylene fiber bundle treated by atmospheric argon plasma and the epoxy resin interlaminar shear strength were investigated by varying technical conditions of low temperature and atmospheric argon plasma.
改变低温常压氩等离子体处理条件,考察处理后超高分子量聚乙烯纤维束强度与环氧树脂层间剪切应力与各变化因子的关系曲线,通过比较性能的变化,研究氩等离子体处理条件对纤维界面性能的影响。
补充资料：闭锁间隙
闭锁间隙----又叫弹低间隙。武器闭锁后，当枪机与机匣上的闭锁支撑面紧贴，枪弹以斜肩或底沿与枪管紧贴时，枪弹底面与枪机弹底窝平面之间的距离称为弹底间隙。若枪弹底平面与枪机弹底窝平面紧贴，则枪机匣上的闭锁支撑面之间的距离称为闭锁间隙。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条