说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 粘接能力
1)  radiation-induced grafting
粘接能力
1.
In this paper, the latest development of polroropylene functional modifiction was reviewed in terms of the modification methods, such as hydroperoxidation, haiogenation, boranation, terminally, functionization, and radiation-induced grafting.
本文综述了1990年以来聚丙烯(PP)的氧化、卤化、硼化、辐射接枝及其它末端功能化改性、其粘接能力、相容性的改善及在工程材料作为相容剂的应用的最新进展。
2)  Adhesion property
粘接性能
1.
It also reviews the recent developments in the surface modification technique for improving the adhesion property of polyethylene coating.
文章综述了输油输气管道防腐涂层技术和以聚乙烯为主要成分的防腐涂层补口技术的现状,介绍了提高聚乙烯涂层粘接性能的表面改性技术的一些新进展,重点介绍了笔者在国外工作期间开发的一项新的聚乙烯表面紫外光接枝改性技术,该技术具有工艺简单、实用化程度高等优点。
3)  adhesion [英][əd'hi:ʒn]  [美][əd'hiʒən]
粘接性能
1.
Effects of content and comb-branched structure of CPD on the mechanical property,adhesion and water-resistance of CWPU were studied.
用梳状支链结构的聚合物二醇(CPD)和聚己内酯二醇(PCLD)共同作软段,制备了含有梳状支链结构的水性聚氨酯(CWPU),着重研究了CPD含量和梳状支链结构对CWPU力学性能、粘接性能和耐水性的影响。
2.
A kind of modified casting polyurethane by styrene and divinyl benzene with good adhesion with ethylene-propylene-diene monomer(EPDM)has been prepared by one-step process, which can be cured at the room temperature.
采用苯乙烯、二乙烯基苯对聚氨酯进行了改性研究 ,利用一步法工艺 ,制备了与三元乙丙橡胶具有优良粘接性能的双组分室温固化的改性浇注胶。
3.
The adhesion experiments show that the content of epoxy resin has a significant effect on the T-peel strength of the modified WPU film;the T-peel strength and initial tack of the film increase to their maximum with the increase of the rosin content and then decrease.
重点考察了环氧树脂、松香和三羟甲基丙烷用量对水性聚氨酯粘接性能和力学性能的影响。
4)  bonding property
粘接性能
1.
The method of surface treatment in common use such as chemical treatment,high temperature melting,ridiation grafting,plasma treatment at low temperature are introduced,and the surface modifier commonly used by PTFE and the new adhesive with good bonding property to PTFE are also discussed.
分析聚四氟乙烯(PTFE)难粘接的原因,介绍化学处理法、高温熔融法、辐射接枝法、低温等离子体处理法等PTFE常用的表面处理方法,以及PTFE常用的表面改性剂和粘接性能优良的新型PTFE粘接剂。
2.
This paper discussed the surface treatment, bonding property of PTFE and a new surface modifier, which was obtained from the reaction of γ aminopropyl triethoxysilane (KH 550) and boric acid.
本研究以一种新的表面改性剂对聚四氟乙烯(PTFE)的表面进行改性用于改善粘接性能,并与其它几种表面改性剂的改性效果进行了比
5)  adhesive property
粘接性能
1.
Research for the adhesive property of oxidated modification in styrene-butadiene-styrene block copolymer;
氧化改性SBS粘接性能的研究
2.
The curing condition, heat-resistant and adhesive property of phenolic resin modified with silicone are studied with IR, DSC, TGA, shear strength and peel strength.
本文中通过IR,DSC,TG以及剪切强度和剥离强度,对这种热固性有机硅改性酚醛树脂的粘接性能,耐热性能,耐久性能和固化工艺进行考核,证明这种方法制备的树脂粘接强度高,耐热性能优异,耐久性能良好,可以作为耐热结构胶粘剂在航空航天领域应用。
6)  adhesive properties
粘接性能
1.
the SBS tetrabasic graft copolymerization was studied and effects of the monomer ratio,amount of AA and BPO,solidifying technology on adhesive properties were discussed,and the convenient adhesive with good properties for polyolefine was prepared.
研究了SBS四元接枝共聚反应 ,讨论了MMA/BA配比 ,AA和BPO用量、反应时间和反应温度及固化工艺对粘接性能的影响 ,并制得了性能优良、使用方便的聚烯烃用粘合剂。
2.
Calcium sulfate whiskers were used to modify the polyurethane-epoxy resin,and the influence of the pretreatment condition,the length and content of the whiskers on the adhesive properties of the polyurethane-epoxy resins was investigated.
使用硫酸钙晶须对聚氨酯环氧树脂进行改性,研究改性前后、改性条件、晶须长度及晶须加入量对聚氨酯环氧树脂粘接性能的影响,并分析了晶须对聚氨酯环氧树脂的改性机制。
3.
Excellent mechanical properties,resistance ablation and adhesive properties will continue to be the focus of the future research.
力学性能优异、低烧蚀率、良好的粘接性能仍将是未来的研究重点。
补充资料:硫酸粘菌素 ,粘菌素,硫酸多粘菌素E
药物名称:多粘菌素E

英文名:Polymyxin E

别名: 多粘菌素E;可立斯丁;可刹迈仙干糖浆;硫酸抗敌素;硫酸粘菌素 ,粘菌素,硫酸多粘菌素E
外文名:Colistin ,Polymyxin E
性状:
常用其硫酸盐,为白色或微黄色粉末;无臭或几乎无臭。有引湿性。在水中易溶,在乙醇中微溶,在丙酮、氯仿或乙醚中几乎不溶。
药理作用:
抗菌谱和体内过程与多粘菌素B相同。口服不吸收,用于治疗大肠杆菌性肠炎和对其它药物耐药的菌痢。外用于烧伤和外伤引起的绿脓杆菌局部感染和耳、眼等部位敏感菌感染。注射已少用。
适应症:
用于治疗大肠杆菌性肠炎和对其他药物耐药的菌痢。外用于烧伤和外伤引起的绿脓杆菌局部感染和耳、眼等部位敏感菌感染。注射已少用。
用量用法:
1.口服:成人1次50万~100万单位,1日3~4次。儿童1次量25万~50万单位,1日3~4次。重症时上述剂量可加倍。 2.外用:溶液剂每毫升含1万~5万单位,氯化钠注射液溶解。
注意事项:
1.可发生皮疹、瘙痒等过敏症状。胃肠道有恶心、呕吐、食欲不振、腹泻等不良反应。 2.孕妇慎用。 3.口服宜空腹给药。
规格: 片剂:每片50万;100万;300万单位。灭菌粉剂:每瓶100万单位,供制备溶液用(1mg=6500单位)


类别:抗生素
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条