1) vacuum ultraviolet radiation
真空紫外辐照
1.
Damage effects of the vacuum ultraviolet radiation on epoxy EP648, composites nanometer-TiO2/EP648, nanometer-TiO2+M40/EP648 and M40/EP648 were studied using a gas-jet type of vacuum ultraviolet simulator for simulating the ultraviolet radiation in vacuum.
利用射流式真空紫外辐照设备模拟空间的辐照条件,在温度为150K和压力为10~(-4)Pa的条件下,研究了波长为1~200nm的真空紫外线对纳米TiO_2/EP648、纳米TiO_2+M40/EP648、M40/EP648复合材料以及环氧树脂EP648的辐照损伤效应。
2.
A device to study vacuum ultraviolet radiation characteristics of diffuser by simulating space ultraviolet radiation environment was build up,and the vacuum ultraviolet radiation characteristics of Al+MgF2 diffuser in space ultraviolet remote sensing instrument were researched.
基于空间紫外辐照环境构建了漫反射板真空紫外辐照特性研究装置,利用该装置对空间紫外遥感仪器Al+MgF2漫反射板的真空紫外辐照特性进行了研究。
3.
The effects of thermo-cycling and vacuum ultraviolet radiation in low earth orbit on performance damage of Al/Kapton films were investigated using space environment ground-based simulation facility.
在空间环境地面模拟设备中模拟热循环、真空紫外辐照等低地球轨道空间环境对Al/Kapton薄膜的损伤效应。
2) vacuum ultraviolet irradiation
真空紫外辐照
1.
A study on the resistance performance of epoxy nano-composites under vacuum ultraviolet irradiation
环氧基纳米复合材料抗真空紫外辐照性能研究(英文)
4) VUV radiation
真空紫外辐射
1.
The results show that as the pressure and Xe fractions increasing,147 nm VUV radiation efficiency decreases,but 173 nm VUV efficiency increases.
为了提高共面介质阻挡放电(DBD)的真空紫外线(VUV)辐射效率,采用流体模型研究了Ne/Xe混合气体的压强及Xe含量对DBD真空紫外辐射特性的影响。
5) Ultraviolet and vacuum ultraviolet radiometric standard
紫外-真空紫外辐射标准
6) UV irradiation
紫外辐照
1.
Influence of zinc oxide on the aging resistance of EPDM under UV irradiation;
氧化锌对EPDM抗紫外辐照老化性能的影响
2.
The effects of UV irradiation time, monomer (MAH) and initiator (BP) concentration on grafting rate and gel content of grafted polyethenes were studied.
采用紫外辐照技术制备了聚乙烯-马来酸酐接枝物,并用红外光谱对接枝物进行了表征。
3.
The effect of UV irradiation on the structure and properties of linear low-density polyethylene (LLDPE) and the mechanical properties of nylon 66 (PA66)/LLDPE blends were studied with FTIR and XPS, measurements of gel, melt index, and water contact angle, and mechanical property tests.
通过紫外辐照实现了高密度聚乙烯(HDPE)的官能化,改善了HDPE复合材料的性能[1-3]。
补充资料:掺杂石英光纤和紫外辐照计
掺杂石英光纤和紫外辐照计
掺杂石英光纤和紫外辐照计 顾茸安供稿
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条