1) far infrared radiation drying technique

远红外辐射干燥
2) infrared radiation drying

红外辐射干燥
1.
After using infrared radiation drying the pulp canteen process, the power consumption expenses is reduced from 0.
采用红外辐射干燥工艺 ,能耗费用可由 0 。
3) far-infrared drying

远红外干燥
1.
This paper discusses the influences of capsicum's quality of drying methods include electric drying,electric vacuum drying,far-infrared drying and microwave drying.
不同干燥方法对辣椒品质的影响不同,探讨电热干燥、真空电热干燥、远红外干燥及微波干燥方法对辣椒品质的影响。
2.
In terms of dehydrating test and process analysis of pteridium aquilinum dried by vacuum drying,convective airflow drying and far-infrared drying,this paper considered that the process of vacuum dehydration was similar to that can be divided into three phase of the dehydration:initial phase, invariable velocity phase and descending velocity phase.
对蕨菜真空干燥、常压热风及远红外干燥进行对比试验分析,得出真空干燥蕨菜与热风干燥及远红外干燥过程有相似之处,即可以分成3个阶段:初始阶段、恒速阶段和降速阶段,但真空干燥可获得较低含水量的干制品。
3.
The thin-layer drying tests on white mushroom were made by the far-infrared drying test box.
利用远红外干燥试验箱对杭州白蘑菇进行了单层干燥试验,综合考虑干燥速度及电耗,得出较佳的干燥过程参数(箱温 60℃,照距14 cm,箱内对流风速自然对流)及较佳的物料参数(料厚1~3mm,装载量4。
5) infrared seed drying

红外辐射种子干燥
6) far-infrared radiation

远红外辐射
1.
energy saving principle and applications of far-infrared radiation dope;

远红外辐射涂料节能原理与应用
2.
The system applies the dry technique of far-infrared radiation, continuum transmission, according to the breed of the fruit or the vegetable to control the temperature and the drying time of each section.
系统应用远红外辐射干燥技术,连续传动的干燥方式,根据蔬菜的品种及含水量,可对各个温区的温度及干燥时间进行控制。
3.
The research and development of far-infrared radiation glaze was presented and reviewed.

综述了目前国内外远红外辐射釉的研究进展 ,并在材料、功能机理制备以及应用等方面进行了较详细的讨论 ,可为远红外辐射釉研究技术人员提供参考与思路。
补充资料:远红外干燥器
远红外干燥器
far-infrared radiation dryer
丫uanhongwa一ganzaoqi‘远红外干燥器(far一infrared radiationdryer) 以远红外线为热源的干燥设备。根据工艺需要可间歇操作或连续操作。通常用子干燥耐火纤维制品和其他异型制品。具有不污染制品、干操速度快及操作灵便等优点. 工作原理利用一般有机物(如甲基纤维素)和许多无机材料吸收红外线能力强的特点,当物料吸收红外线后,被吸收的红外辐射能童会进一步激化分子的振动,增大振动动量子数,扩大振幅而使振动变大,并转换为分子的热运动能.从而使物料的温度上升,收到受热较均一,干燥速度快的良好效果。 设备组成主要由远红外线辐射器与干燥室组成。 (1)远红外线辐射器.由数组装于干燥室内两侧墙壁上的远红外线辐射元件组成。通常有电热式、嫩烧气体加热式及余热烟气加热式3种。电热式结构简单,使用方便,在耐火材料工业中应用较多。电热式又分旁热式和直热式两种。直热式取消了旁热式的中间传热介质,而将远红外涂料直接涂在发热体上,具有加热速度快,热损失小及热效率高的效果。最常用的电热远红外辐射源有碳化硅电热板(管)和金属电热管(板)等。 (2)干燥室。分室式干燥室和隧道式干操室两种。参见室式干澡器和隧道式干澡器。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条