1) iron chip packed column
铁屑填料塔
2) packed column
填料塔
1.
Optimization design principle for gas-liquid distributor of packed column;
填料塔气液分布器优化设计规律
2.
Volumetric mass transfer coefficients of dilute CO_2 absorption into mixtures of potassium carbonate and piperazine in packed column;
填料塔中碳酸钾/哌嗪混合吸收液脱除CO_2的体积传质系数
3.
Application of plate column and packed column in oil refining and its cost analysis;
板式塔与填料塔在炼油中的应用及成本分析
3) packing column
填料塔
1.
Research on SO_2 absorption in flue gas by sodium alkali solution in packing column;
填料塔中钠碱溶液脱除烟气中SO_2研究
2.
Progress on the research of fundamental theory of packing column;
填料塔基础理论研究新进展
3.
Characteristics of SO_2 absorption in flue gas by citrate solution in packing columns;
填料塔中柠檬酸盐溶液脱除低质量浓度SO_2的特性
4) packed tower
填料塔
1.
Design of fault diagnosis expert system for packed tower;
填料塔故障诊断系统设计(英文)
2.
Simulation of commercial CO_2 absorption into activated MDEA aqueous solution by packed tower;
填料塔中活化MDEA吸收CO_2的模拟研究
5) tower packing
塔填料
1.
Preparation and application of low foaming random plastic tower packing;
低泡型塑料散装塔填料研制与应用
2.
Coasening surface for raising surface tension and changing surface molecule structure for increasing surface polarity are main methodes to improve the surface wetting property of plastic tower packing.
塑料塔填料表面能低,润湿性差,不利于传质。
6) packing tower
填料塔
1.
By using of the principles of objective oriented program language and software development,combined with the process design of packing tower,software for designing packing tower has been developed.
利用面向对象的程序设计语言和软件开发的原理,结合填料塔的工艺设计过程,开发了填料塔的设计软件。
2.
The influence of structural parameters of plastics porous corrugated plate packing on its hydrodynamic performance was investigated in a Φ 300 mm packing tower with air-H 2O system.
在内径为 30 0mm的填料塔中 ,以空气 -水为物系 ,研究了塑料孔板波纹填料的结构参数对其流体力学性能的影响。
3.
The influence of structural parameters of corrugated plate packing on performance of axial mixing in liquid phase was investigated in 300mm ID packing tower with air-H2O-KCl system.
在内径300mm的填料塔中,以空气-水-氯化钾为物系,研究了孔板波纹填料的结构参数对液相轴向混合特性的影响。
补充资料：填料函填料
分子式：
CAS号：
性质：又称填料函填料或螺旋盘根。主要用于填塞反应釜、搅拌器、泵等旋转轴或往复活塞杆及阀杆轴贯通处的填料函(stuffing box)，以抑止旋转或往复运动的轴杆处的低压蒸汽、气体、热水、溶液及各种介质的泄漏。常以棉麻、石棉、聚四氟乙烯、碳纤维、金属箔等单独或几种材料组合，经捻合、编织或与橡胶并用制成，为条状产品。横断面有正方形、梯形、圆形等，填料条按其截面大小绕成不同直径的螺旋状制品，使用时将其切断成适当周长的环，卷于轴的四周，依次塞入填料函中，用盖锁紧，完成密封。
CAS号：
性质：又称填料函填料或螺旋盘根。主要用于填塞反应釜、搅拌器、泵等旋转轴或往复活塞杆及阀杆轴贯通处的填料函(stuffing box)，以抑止旋转或往复运动的轴杆处的低压蒸汽、气体、热水、溶液及各种介质的泄漏。常以棉麻、石棉、聚四氟乙烯、碳纤维、金属箔等单独或几种材料组合，经捻合、编织或与橡胶并用制成，为条状产品。横断面有正方形、梯形、圆形等，填料条按其截面大小绕成不同直径的螺旋状制品，使用时将其切断成适当周长的环，卷于轴的四周，依次塞入填料函中，用盖锁紧，完成密封。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条