2) PE/PE laminate
PE/PE层合板
1.
A progressive damage model has been developed for thermoplastic PE/PE laminates subjected to static tensile loading,by considering the nonlinear properties of unidirectional composites in longitudinal,transverse and shear stress-strain behavior as piecewise linear-elastic properties.
以分段线弹性方法考虑了单向复合材料纵向、横向与剪切的非线性特性,建立了静拉伸热塑性PE/PE层合板逐渐损伤模型,利用有限元技术模拟研究了UHMWPE/LDPE层合板逐渐损伤的过程及机理。
3) PE separator
PE隔板
1.
Discussion on the premature failure modes of motorcycle batteries with PE separators;
使用PE隔板的摩托车电池的早期失效方式
2.
Determination and investigation on weight loss in acidof PE separator for lead-acid batteries;
PE隔板浸酸失重的测试及其机理研讨
4) polyethylene
[英][,pɔli'eθəli:n] [美]['pɑlɪ'ɛθəlin]
PE
1.
Carbon black(CB) was added into poly(ethylene terephthalate)/polyethylene(PET/PE) blend by discretely feeding technology and fiber grade PET/PE/CB conductive master batch with good combined properties was prepared in reciprocating pulsation extruder.
采用分离喂料技术在聚对苯二甲酸乙二酯(PET)/聚乙烯(PE)共混物中加入导电炭黑(CB),通过布斯往复式脉动挤出机熔融共混、挤出造粒,制备了综合性能较好的纤维级PET/PE/CB导电母料。
2.
A series of PP ( propylene - ethylene copolymer) /PE ( high density polyethylene) blends with different melting flow rate ratio (RM=MFRpp/MFRPE ) were obtained by matching PP and PE with different melting flow rates (MFR).
选择不同熔体流动速率(MFR)的乙-丙共聚型聚丙烯(PP)和聚乙烯(PE),分别配混出一系列不同熔体流动速率比(R_M=MFR_(PP)/MFR_(PE))的共混体系。
3.
For the sake of preventing reuniting of polyethylene,the polyethylene is dispersed with rapid cutting and the admixture is added,which can graft into polyethylene in milling process.
目的研究聚乙烯(polyethylene,PE)、胶粉复合改性沥青的韧性、相容性能,以及抗老化性能。
5) rubber-polyethylene hybrid separator
橡胶-PE复合隔板
补充资料：凹板印刷机用胶布板
分子式：
分子量：
CAS号：
性质：用于高速轮转凹版印刷机的胶布板。供印刷报纸、杂志、图书等。与凸版印刷机用胶布板的装置位置相同，不与油墨直接接触，但作用不同，通过橡皮表层的弹力作用，将凹沟内的油墨吸到纸张上。印刷时所受的压力较大，胶层须较厚。
分子量：
CAS号：
性质：用于高速轮转凹版印刷机的胶布板。供印刷报纸、杂志、图书等。与凸版印刷机用胶布板的装置位置相同，不与油墨直接接触，但作用不同，通过橡皮表层的弹力作用，将凹沟内的油墨吸到纸张上。印刷时所受的压力较大，胶层须较厚。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条