1) resistance to boiling water
耐沸水稳定化
2) boiling water resistance
耐沸水性
1.
The composition,boiling water resistance,steam resistance and other physical properties of a silicone modified urushiol resin corrosion protective paint have been described.
介绍了以有机硅改性漆酚树脂为基料的防腐涂料的构成，及其耐沸水性、耐水蒸汽性及其他理化性能。
2.
74 MPa,the increase ofboiling water resistance was obvious when the mass fraction of melamine was between 43% and 65%,but the increaseof boiling water resistance and wet shearing strength for MUF was non obvious when the mass fr.
74 MPa,耐沸水性明显提高;但是,当w(三聚氰胺)>65%时,该MUF树脂的湿强度增长极其缓慢,其耐沸水性提高并不明显;通过引入复合改性剂和适量的水,可使该MUF树脂的游离甲醛含量降低50%、成本降低10%～15%、固含量基本不变、胶合强度和耐沸水性均有所提高且适用期良好。
3) color fastness to water
耐水颜色稳定性
1.
Veneer,dyed by acid dyes,easily fades because of its poor color fastness to water.
采用不同种类固色剂对染色桦木单板进行后处理,探讨其对染色单板表面耐水颜色稳定性的影响。
4) stability to hydrolysis resistance
耐水解稳定性
1.
Comparing the parameter of the physical property, the experiment summarizes the factors which influence the stability to hydrolysis resistance of PU.
以不同的聚多元醇、聚酯和二苯基甲烷二异氰酸酯配伍合成聚氨酯树脂 ,采用丛林实验并通过物理性能参数对比总结出了影响聚氨酯树脂耐水解稳定性的因素。
5) thermo oxidative stability (TOS)
耐热氧化稳定性
1.
The processing of graphite fiber reinforced MPI resin matrix composite materials were discussed The results of the study indicate that AS4/MPI composite materials flexural and interlaminar shear properties at 371℃ is above 50%at RT , the 2 25% weight loss of composite materials at 371℃ demonstrates its good thermo oxidative stability (TOS
2 5 % ,表明其具有较好的耐热氧化稳定性 (TOS
6) fastness to potting
耐沸水牢度
补充资料：耐沸水性
分子式：
CAS号：
性质：涂膜对沸水浸泡的抵抗能力。测试时，将涂漆样板的2/3面积浸于沸腾的蒸馏水中，达到规定时间后取出，检查起泡、生锈、失光、变色等破坏现象。该指标对考核经常接触热水、热汤等的涂膜，是必须的检测项目。
CAS号：
性质：涂膜对沸水浸泡的抵抗能力。测试时，将涂漆样板的2/3面积浸于沸腾的蒸馏水中，达到规定时间后取出，检查起泡、生锈、失光、变色等破坏现象。该指标对考核经常接触热水、热汤等的涂膜，是必须的检测项目。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条