1)  quantitative
定量阀
1.
In this anticle the writer explains the desgning principle of the quantitative controllers with its flow characteristic, and analysis the factors that will affect the stability of the flow moreover, the writer advances the method to improve the stability.
本文阐述了定量阀的设计原理及其流量特性,并对影响流量稳定性的因素进行分析,进而提出了改善稳定性的措施。
2)  Quantification
定量
1.
Study on Extraction Technology with Supercritical CO_2 Fluid and Quantification of Lycopene;
天然番茄红素超临界CO_2萃取和定量的研究
2.
Design of quantificational static pressure orientedorbit of the circle worktable of vertical grinder;
立轴圆台模具磨床定量式静压导轨的设计
3.
Quantification of total choline compound in in-vivo breast cancer with external standard with ~1H magnetic resonance spectrum;
利用~1H MRS进行在体乳腺癌中复合胆碱外参照法定量的研究
3)  Quantitative
定量
1.
Qualitative and Quantitative Analysis of Mycotoxin Citrinin;
桔霉素的定性及定量测定方法研究进展
2.
The research of fast quantitative analysis method on blend textile product;
混纺产品快速定量分析方法
3.
Development of a Fast Quantitative Measurement Meter for Hydrogen Content in Aluminum Melts;
铝液快速定量测氢系统的再开发
4)  quantity
定量
1.
A method for the determination quantity of coconut oil momoethanolarnide by reversed-phase hlgh performance liquid chromatgraphy is presented.
样品直接用90%甲醇水溶液溶解,在ODSC-18反相住中,用甲酸与水体积比为90比10作为流动相,在波长210nm下检测定量。
2.
Abstract: This paper studied the method for silica column chromatography method for analysis and quantity of alkanolamide.
本文研究了以硅胶柱层析法对烷醇酰胺进行的分离和定量。
3.
Methods The third generation ELISA and Flurescent Quantity PCR methods were used to detect 116 cases of anti-HCV positive or HCV RNA positive samples.
目的探讨丙型肝炎病毒抗体(抗—HCV)和HCVRNA定量检测阳性结果对丙型肝炎诊断治疗的临床意义。
5)  quantitation
定量
1.
A Method of Determing Subunit Quantitation of Wheat Glutenin Macropolymer;
小麦谷蛋白大聚合体亚基定量分析技术研究
2.
Calibration and Preliminary Application of Linear Quantitation Standard for Anti-HEV IgG Antibody;
抗戊型肝炎病毒IgG抗体定量线性标准品的标定及初步应用
3.
Using proposed approach, method development can be more efficient and analysis time shortened while sufficiently precise quantitation can be achieved with acceptable precision.
研究了多元校正与实验设计相结合,采用内标法以及人工神经元网络法来改善毛细管电泳中未完全分离峰的定量解析。
6)  basis weight
定量
1.
The application of predictive functional control algorithm to the moisture and basis weight control;
预测函数控制在水分定量控制中的应用
2.
Neural network used in the control of cross-directional basis weight in the paper machine;
神经网络在纸机横向定量控制中的应用
3.
Research on Key Technologies of Measure and Control System in Paper Basis Weight and Moisture;
纸张定量和水分测控系统关键技术研究
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动
说明:补充资料仅用于学习参考,请勿用于其它任何用途。