1) presser pressure
压掌压力
1.
This paper discusses the influencing factors on the pressure of flyer presser and on the relationship between the presser pressure and the roving tension by means of analysing and measuring the presser pressure during winding on the flyer frame.
本文通过对粗纱卷绕过程中锭翼压掌压力的分析和测试,深入探讨各种因素对压掌压力的影响以及粗纱张力与压掌压力的关系,为合理确定压掌的结构参数提供理论依据。
2) press palm strength
压掌力
3) Pressing pressure
压制压力
1.
The effect of the size of particulates and pressing pressure on porosity ratio has been studied.
对 Al2 O3颗粒预制体的气孔率测定方法进行了探讨 ,研究了颗粒粒度与压制压力对气孔率的影响。
2.
The effects of pressing pressure on the microstructure and properties of the materials were investigated.
采用粉末冶金液相烧结工艺制备Si 50Al电子封装材料,研究了压制压力对材料性能的影响。
4) packing pressure
保压压力
1.
The effect of packing pressure and packing time on thickness distribute of injection molding parts;
保压时间和保压压力对注塑制品厚度分布的影响
2.
Optimization of injection molding packing pressure curve based on ActiveX and MPI
基于ActiveX和MPI优化注射成型保压压力
3.
The packing pressure,melted mass temperature,mold temperature and cooling time were also analyzed by using orthogonal experiment method.
利用Moldflow软件对注射器塑料件的翘曲原因进行分析,并采用正交试验设计方法(单参数变动实验)对保压压力、熔体温度、模具温度、冷却时间等进行分析。
5) hot pressing pressure
热压压力
1.
The results show that,with the increase of hot pressing pressure,the open porosity decreases,relative density and bending strength increase.
研究了真空热压工艺、烧结助剂对碳化硼陶瓷性能及断口的影响,结果表明,以活性炭和碳化硅为烧结助剂的碳化硼陶瓷随热压压力增加,开口孔隙度减小,相对密度和抗弯强度增加。
6) compacting pressure
压制压力
1.
Influence of compacting pressure on properties of microwave sintered W-Ni-Fe high density alloy;
压制压力对微波烧结W-Ni-Fe高密度合金性能的影响
2.
Influence of compacting pressure on properties of sinter-hardening P/M steels;
压制压力对粉末冶金烧结硬化钢性能的影响
3.
The experiments result showed that transverse rupture strength(TRS) of the samples firstly increased with the increase of compacting pressure(≤150MPa) of the green compact.
实验结果表明:烧结坯的抗弯强度先随生坯的压制压力(≤150 MPa)增加而增加,随后(210 MPa~600 MPa)增加缓慢,最后(≥600MPa)下降;烧结坯的变形率则随生坯的压制压力(≥300 MPa)增加而增大;最佳生坯的压制压力范围是150MPa~210 MPa。
补充资料：王在掌上
1.《隋书．高祖纪上》:"﹝高祖文皇帝﹞为人龙颜，额上有五柱入顶，目光外射，有文在手曰'王'。"后以"王在掌上"为称帝之征的典实。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条