说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 三元系等温截面图
1)  Isothermal section diagram of ternary system
三元系等温截面图
2)  isothermal section in ternary system
三元系等温截面相图
3)  isothermal section of ternary system
三元系等温截面
4)  isothermal section
等温截面
1.
The isothermal section of Fe-Co-Nb ternary system at 1173 K;
Fe-Co-Nb三元系相图的1173 K等温截面
2.
1100 ℃ isothermal section of Ti-Al-V ternary system;
Ti-Al-V三元系相图1100℃等温截面的测定
3.
Determination of isothermal sections of Nb-Cr-Hf ternary system at 1473 K;
Nb-Cr-Hf三元系1473 K等温截面的测定
5)  phase diagram
等温截面
1.
The isothermal section of the phase diagram of the Gd-Fe-Sb ternarysystem at 773K has been investigated mainly by X-ray powder diffractionin this work.
本文用X射线衍射分析等技术测定了Gd-Fe-Sb三元系合金相图773K等温截面。
2.
The isothermal section of the phase diagram of the La-Fe-Sb ternary system at 773K has been investigated mainly by X-ray powder diffraction with the aid of metallographic analysis in this work.
本文用X射线衍射分析、金相分析等技术测定了La-Fe-Sb三元系合金相图773K等温截面。
3.
The isothermal section of the phase diagram of the La-Fe-Sb ternary system at 500℃ has been investigated mainly by X-ray powder diffraction with the aid of metallographic analysis in this work.
本文用 X 射线衍射分析、金相分析和能谱分析等技术测定了镧(La)-铁(Fe)-锑(Sb)三元系合金相图500℃等温截面。
6)  873 K isothermal section
600℃等温截面
1.
The 873 K isothermal section of La-Ni-Cr ternary system phase diagram was investigated by X-ray powder diffraction, differential thermal analysis and electron microscopy techniques.
用X射线粉末衍射法,差热分析法和金相分析法测定了La-Ni-Cr三元系600℃等温截面的相关系。
补充资料:三元系多温截面


三元系多温截面
iso-composition section of ternary system

sanyuanxi duowen』iemian三元系多沮截面(150一eomposition seetion ofternary system)通过三元相图底面某一直线的垂直平面与立体相图相截,把所得交线画在该垂直平面上,并标出相应相区符号的平面几何图形(见图)。它是以温度为纵坐标,相组成为横坐标,由液化线(一次结晶开始的温度曲线),固化线(固化温度的等温线)、亚液化线(二元共结晶开始的温度曲线)和由液化线、亚液化线、固化线分隔出来的液相区,一种固相与液相共存的固+液区,两种固相与液相共存的固1+固2+液区,全为固相的固化区等结构要素构成。一几+c+L A尸B, 三元系多温截面图 多温截面可以很直观地反映出组成坐标上,所有混合物从熔融到固化的温度范围内的相变化情况,并把三元相图的基本特征确定下来,是测定和研究三元相图的很有用的手段。但必须注意,一般来说不能由等组成截面确定平衡各相的含量及成分。 多温截面可直接根据三元系液化面投影图作出。只要对组成坐标上各点的相变温度(如一次结晶开始温度、二元共结晶开始温度、固化温度,以及有转熔反应时的开始温度和结束温度)逐点描绘在预先建立起来的温度直角坐标系中,并把相同相变点的轨迹连结起来,然后标出相应的相区符号即成。为了正确标明相区符号,熟悉掌握组成坐标上几个特殊组成点限p投影图中的截面线与所有界线和边的交点及截面线与各顶点组元和三元无变点连线的交点)的析晶过程是至关重要的。 (张垂昌)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条