1) spray atomization and co deposition
喷雾沉积法
1.
The superplasticity of aluminum matrix fabricated by spray atomization and co deposition was investigated.
喷雾沉积法制造的ＳｉＣＰ／ＬＹ１２复合材料经热压和热正挤压后，晶粒得以细化，ＳｉＣＰ分布的均匀性大大改善。
2) spray deposition
喷雾沉积
1.
Damping Properties of ZA 27 Alloy Containing Silicon Produced by Spray Deposition;
喷雾沉积含硅ZA27合金的阻尼性能
2.
ZA27 alloy doped with 4%Si (named ZA27-4%Si ) was prep ared by spray deposition technique, and then the alloy was hot extruded at 250 ℃.
用喷雾沉积快速凝固技术制备了含硅 4 %的ZA2 7合金 ,并对其进行了热挤压。
3.
This paper deals with friction and wear performance of spray deposition ZA27 alloy containing 6mg' g-1 silicon.
研究了喷雾沉积ＺＡ２７（含Ｓｉ６０ｍｇ。
3) Spray co-deposition
喷雾共沉积
1.
It is indicated that the high strength and high conductivity materials can be expected to be produced by spray co-deposition process by more detailed analysis of both the specificity of such process and the strenthening mechanism of high conductivity materials.
指明了发展高强度高导电率材料过程中存在的主要问题,通过对喷雾共沉积工艺过程的特殊性和高导电材料的强化机制两方面较为详尽的分析,指出采用喷雾共沉积工艺可望制备出高强度高导电率的材料。
4) spray co deposition
喷雾共沉积
1.
The typical characteritics of the spray co deposition were summerized.
概述了喷雾共沉积工艺的典型特点，指出喷雾共沉积工艺在高阻尼减振材料、耐磨减摩材料、高强度高导电材料制备方面具有广阔的前景。
2.
The paper has analysed the solidification and momemtum transportation behaviour during the process of spray co deposition technology and indicated that the nucleation mode of pore was favourable to the refining of crystal.
对喷雾共沉积工艺过程中的凝固与动量传输行为进行了分析。
3.
Three kinds of graphite particulate reinforced zinc based MMCS with 5, 10 and 15 volume fraction percent were prepared by spray co deposition.
ｇ－１Ｓｉ并采用喷雾共沉积技术制备了石墨颗粒体积分数分别为５％，１０％，１５％的锌基复合材料。
6) spray atomization & deposition
喷射雾化沉积
补充资料：超低容量喷雾法
分子式：
分子量：
CAS号：
性质：利用一种特殊设备和喷头喷洒农药，使药剂的雾沫到达80-120微米的方法。药剂不需要特殊加工处理，只要加入极少量的溶剂，以解决因粘滞性过大而影响喷雾的质量。特点是用药量少、工效快、残效期长、粘附性好、流失量大。环境污染大大减轻，但不适用于毒性太大的药剂。
分子量：
CAS号：
性质：利用一种特殊设备和喷头喷洒农药，使药剂的雾沫到达80-120微米的方法。药剂不需要特殊加工处理，只要加入极少量的溶剂，以解决因粘滞性过大而影响喷雾的质量。特点是用药量少、工效快、残效期长、粘附性好、流失量大。环境污染大大减轻，但不适用于毒性太大的药剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条