1) Molybdenum oxide block
氧化钼块
2) molybdenum trioxide
三氧化钼
1.
A New Process of Preparing High-purity Molybdenum Trioxide by Microwave Hybrid Heating;
微波混合加热制备高纯三氧化钼新工艺
2.
Electrochemical properties of molybdenum trioxide and its appl ications;
三氧化钼的电化学性质及其应用
3.
Progress in preparation and electrochemical properties of lithium intercalation-detercalation of layered molybdenum trioxides has been introduced.
三氧化钼具有独特的层状结构,主要以三种相态存在:热力学稳定的正交相、热力学介稳的单斜相和六方相。
3) MoO3
三氧化钼
1.
Synthesis of MoO3 nanobelts with no template via a simple hydrothermal method from peroxomolybdic acid sols was reported.
以过氧钼酸溶胶为反应前驱体采用简单的水热方法,在没有任何模板剂的条件下合成三氧化钼纳米带,通过XRD,SEM,TEM和IR等测试方法对产物进行结构表征和形貌分析。
2.
Molybdenum trioxides(MoO3) usually have three forms: orthorhombic,hexagonal and monoclinic.
三氧化钼(MoO3)以三种常见的物相存在:正交相、六方相和单斜相,前者为热力学稳定相,后两者为热力学介稳相。
3.
This study investigated physicochemical characters and biotoxicity of waste water and leachate of waste residue from MoO3 produced using physicochemical analysis and biotoxicity test.
利用理化和生物监测相结合研究了三氧化钼(MoO3)生产排放废水及废渣的理化特性及生物毒性。
4) molybdenum oxide
氧化钼
1.
Developing Technology of Direct Alloying of Scheelite, Molybdenum Oxide and Vanadium Slag;
发展钨精矿、氧化钼、钒渣直接合金化技术
2.
Smelting High Speed Steel with Direct Reducing and Alloying of Scheelite and Molybdenum Oxide;
白钨矿和氧化钼直接还原合金化冶炼高速钢
3.
Determination of Copper and Lead in Molybdenum Oxide by FAAS;
火焰原子吸收法测定氧化钼中铜、铅
5) molybdenum trioxide
氧化钼
1.
The study on the solubility of compound salt ammonium molybdate·molybdenum trioxide;
钼酸铵氧化钼复盐溶解性能研究
2.
The preparation and research progress of molybdenum trioxide powders, thin-films recently have been reviewed in this paper.
介绍了近年来国内外对氧化钼粉体、薄膜的制备方法和研究进展,并对超细氧化钼研究发展提出了一些看法。
3.
For example, the application of molybdenum trioxide electro-colour glass,molybdenum electrode in mid-alkali glass fiber instead of platinum drawn wire furnace as well as full-electrofusion or ancillary-electrofusion glass furnace and mineral melting.
例如,三氧化钼电致色玻璃、钼电极在中碱玻纤代铂拉丝炉以及在全电熔或辅助电熔玻璃窑和钼电极用到矿物体熔制中的应用等等都相继在提高玻璃质量、增加产量、节能降耗方面取得了显著的经济效益。
6) molybdenum-tungsten oxide
氧化钼钨
1.
Multielemental bimetallic molybdenum-tungsten oxide nanorods were synt hesized under mild hydrothermal conditions with the aid of Na2SO4 salt, using fr eshly prepared molybdic-tungstenic acid precipitate as precursor.
本文通过温和的水热方法,以钼钨酸沉淀作为前驱体,在Na2SO4的辅助作用下,合成了双金属多元型的氧化钼钨纳米棒,并通过TEM、SEM、XRD、EDS和PL等手段对产物进行了表征。
补充资料：钴钼氢氧化物氧化物磷酸盐
CAS：68130-37-0
中文名称：钴钼氢氧化物氧化物磷酸盐
英文名称：Cobalt molybdenum hydroxide oxide phosphate； Molybdenum cobalt acid phosphate complex； Molybdenumcobaltacid phosphate complex
中文名称：钴钼氢氧化物氧化物磷酸盐
英文名称：Cobalt molybdenum hydroxide oxide phosphate； Molybdenum cobalt acid phosphate complex； Molybdenumcobaltacid phosphate complex
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条