1) strips in irregular shape
异型带材
2) profile
[英]['prəʊfaɪl] [美]['profaɪl]
异型材
1.
Effect of Oscillation Field on Polymer Melt Flow in Extrusion Die of Profile;
振动场对聚合物熔体在异型材挤出口模内的流动影响
2.
Design of Extrusion Die for PA66 Heat Insulating Profile for Window;
PA66窗用隔热异型材挤出模具设计
3.
Numerical Simulation of the Melt Flow Characteristics in Coextrusion Runner of the Steel/Plastic Composite Profile;
钢塑复合异型材共挤流道内熔体流动特性的数值模拟
3) PVC profiles
PVC异型材
1.
The application of infrared spectrograph to the production of PVC profiles;
红外光谱仪在PVC异型材生产中的应用
2.
Two problems concerning the plastification quality of PVC profiles;
与PVC异型材塑化质量相关的两个问题
3.
The article has described toughening mechanism of nanometer CaCO3, Application of nanometer CaCO3 in PVC profiles and compared with conventional particle CaCO3 in PVC profiles.
介绍了纳米CaCO3粒子的增韧增强机理,将纳米CaCO3应用在PVC异型材中,并与一般粒径CaCO3填充的PVC异型材进行了比较。
4) special-shaped wire
异型材
1.
The stress characteristic of the main working methods for processing the special-shaped wire,such as drawing,driven roller die and rolling was analyzed.
针对异型材的几种常用加工方法,如拉伸、辊拉、轧制等,分析它们在加工中的应力特点。
2.
It is very conspicuous that the effect of drawing plastic deformation metal wire with roller die is better,but some broken wires often appear when it is used for drawing wire,especially special-shaped wire of low plastic deformation metal.
辊拉模在拉拔塑性较好的金属线材时效果十分明显,但在拉拔塑性较差的金属线材特别是异型材时,常发生拉断现象,影响加工的连续进行。
3.
In this paper,the level continuous casting technologies of leaded nickel silver , the working ways from round casting stick to special-shaped wire and its crystal structure and mechanical performance were studied.
论文综述了铅锌白铜材料的发展和加工工艺，重点评述了水平连铸工艺，对高镍铅锌白铜加工精密异型材工艺和材料的组织、性能进行了研究。
5) precise profiled titanium wire
异型钛材
1.
Based on the properties of the precise profiled titanium wire that the dimension is small,high accuracy and the requirements of its inner and surface!quality are very high,the article aims to study on preparation of metallographic sample,the way of chemical erosion and aspects needed to pay attention to.
针对异型钛材尺寸小,精度高,内在质量及表面质量要求高的特点,探讨了相应金相样品的制备、化学浸蚀的方法及应该注意的问题,制得了清晰的金相照片,为实现异型钛材生产中的内部质量控制提供了保证。
6) PVC profile
PVC异型材
1.
s: Based on the plastics property, the important functions of lubricants in PVC profile formul￣ation, and how to choose the proper lubricant formulation system were described.
从塑料性质入手,阐述了润滑剂在PVC异型材配方中的重要作用,以及如何选择合适的润滑剂配方体系。
2.
The extrusion technology of PVC profiles was discussed from the aspects of the temperature controlling range, the formulation system, the compounding technology, the equipment performance, the technological system, etc.
从挤出温控范围、配方体系、混料工艺、设备性能、工艺制度等方面对PVC异型材挤出工艺进行了讨论,阐述了保证挤出工艺的措施和方法。
补充资料：板带材
宽厚比很大的矩形断面金属材，主要用轧制方法生产，用途极为广泛。板带材可根据需要剪裁、弯曲、冲压和焊接成各种构件和制品。高速连续式的板带轧机和宽厚板轧机的迅速发展，使板带材成本降低，质量提高，应用日益广泛。工业发达国家的板带钢产量在钢材总产量中的比重逐年增加，目前已达60％左右。
用轧制方法生产的板带材中，最薄的箔材厚度仅有0.001mm,最厚的板材厚度约为300mm；宽度最窄的为1mm，最宽达5300mm。板带材除按钢种和有色金属牌号分类外，一般还按尺寸分类,钢板厚度4mm以上的称中厚板。在中国习惯上称 4～20mm厚的板材为中板，20mm以上称厚板，60mm以上称特厚板(初轧板坯除外)。而对0.1～4mm的冷轧和热轧板带，单片的称薄板，成卷的称带钢。宽度在650mm以上的称宽带钢,不足650mm的称窄带钢。厚度4～60mm,宽度在200mm以下的热轧钢材在中国称扁钢。0.02～0.1mm的冷轧带称薄带。0.02mm以下的带材称箔材,钢铁箔材习惯称为超薄带。关于板带材的制造方法，见中、厚板轧制，带钢热轧，薄板叠轧，带钢冷轧，箔材轧制。
用轧制方法生产的板带材中，最薄的箔材厚度仅有0.001mm,最厚的板材厚度约为300mm；宽度最窄的为1mm，最宽达5300mm。板带材除按钢种和有色金属牌号分类外，一般还按尺寸分类,钢板厚度4mm以上的称中厚板。在中国习惯上称 4～20mm厚的板材为中板，20mm以上称厚板，60mm以上称特厚板(初轧板坯除外)。而对0.1～4mm的冷轧和热轧板带，单片的称薄板，成卷的称带钢。宽度在650mm以上的称宽带钢,不足650mm的称窄带钢。厚度4～60mm,宽度在200mm以下的热轧钢材在中国称扁钢。0.02～0.1mm的冷轧带称薄带。0.02mm以下的带材称箔材,钢铁箔材习惯称为超薄带。关于板带材的制造方法，见中、厚板轧制，带钢热轧，薄板叠轧，带钢冷轧，箔材轧制。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条