1) TiAl 3 Morphology
TiAl3形态
2) TiAl 3
TiAl3
1.
The (TiB 2+TiAl 3)/AlSi 6Cu 4 composite was fabricated by reaction of K 2TiF 6+KBF 4 mixed salts in AlSi 6Cu 4 molten metal.
利用K2 TiF6 +KBF4混合盐和AlSi6 Cu4熔体反应可以制备TiB2 +TiAl3颗粒增强AlSi6 Cu4基复合材料。
2.
The AlTiC master alloy with TiAl 3 having block like distribution shows the best effect of refinement while alloys with TiAl 3 having petal like and flake like distributions are inferior in the effe.
通过对比试验发现 ,不同组织形貌的AlTiC中间合金细化工业纯铝时具有明显不同的细化效果 ,TiAl3 呈块状分布的AlTiC中间合金细化效果最好 ,其次是TiAl3 呈梅花状和片状分布的AlTiC中间合金 。
3.
According to XRD results, there are the TiAl, TiAl 3 and some by products such as KAlF 4 and K 3AlF 6 in the powders.
5h的粉末中有TiAl3,TiAl出现 ,并伴有副产物KAlF4 和K3AlF6 生成。
3) alloyed TiAl_3
TiAl3合金
1.
Realization of Nonalloyed TiAl_3 And Ti/TiAl_3 Ohmic Contact to n-GaN;
在不进行合金化的情况下,首次直接采用TiAl3合金材料作为金属接触电极。
4) TiAl3-P/Al composites
TiAl3-P/Al复合材料
1.
The microstructures of TiAl3-P/Al composites processed by equal channel angular extrusion (ECAP) at room temperature, to an equivalent strain up to 8, were studied by transmission electron microscopy (TEM) and optical microscopy (OM).
利用透射电子显微镜和光学显微镜研究了室温下1~8道次等通道角挤压(ECAP)工艺对TiAl3-P/Al复合材料组织的影响。
5) Al-TiAl3 master alloy
Al-TiAl3中间合金
1.
The second phase particles TiC and TiAl3 on the refining performances of pure aluminum particles were studied in Al-TiC and Al-TiAl3 master alloys.
研究Al-TiC和Al-TiAl3中间合金中第二相粒子TiC和TiAl3对纯铝晶粒的细化作用。
6) morphology
[英][mɔ:'fɔlədʒi] [美][mɔr'fɑlədʒɪ]
形态
1.
Preliminary research on morphology parameters of common minerals in coal;
煤中常见矿物形态特征参数初步研究
2.
Morphology variety mechanism of TiC in Ti alloy by high temperature heat treatment;
钛合金中TiC在高温处理过程中形态变化机制
3.
Morphology and Mechanical Properties of PA 66/Nano-meter Silica Composites;
尼龙66/纳米SiO_2复合材料的形态和力学性能
补充资料：TiAl合金(金属间化合物)显微组织
TiAl合金(金属间化合物)显微组织
T·Al台金(金属间化合物)显微组织
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条