1) Flake geometry
刨花尺寸
3) spangle size
锌花尺工寸
4) wood particles
刨花
1.
The article introduced drying method of wood particles, in order to provide basis for choosing a good drying method, improving drying quality of wood particles, and saving sources.
通过对刨花干燥方法的研究,为人们选择合理的干燥方法、提高刨花的干燥质量及节约能源提供依据。
5) Flake
[英][fleɪk] [美][flek]
刨花
1.
Interaction of Temperature and Moisture Content on Flake Compression Behavior;
温度与含水率交互作用对刨花压缩特性的影响(英文)
2.
Flakes with thickness of 0.
两工段定向刨花板(OSB)刨片制备的新工艺,不需要使用材质非常好的传统木材,能经济、高效地加工出用于生产定向刨花板的刨片。
6) particle
[英]['pɑ:tɪkl] [美]['pɑrtɪkḷ]
刨花
1.
Determination of Key Moisture Contents in Particle Drying Process;
刨花干燥工序关键含水率的确定
2.
Using the residues from wood conversion of Acacia and Eucalyptus species as material, the molded decorative particleboard products were manufactured by two-stage process and the relationship between process parameters and properties of products were studied in this paper.
以相思、桉树2树种的木材加工剩余物为原料,研究两步法刨花模压板的制造工艺以及各工艺参数与板材性能的关系。
3.
membranaceus Munro as materials, PF as adhesive and VAE as adhesive agent, the molded decorative particleboard products were manufactured by two-stage process and the relationship between process parameters and properties of products were studied in this paper under lab conditions.
本论文是以相思木、桉树、云南龙竹、黄竹四种材料的加工剩余物为主要原料，酚醛树脂(PF)为胶粘剂，醋酸乙烯—乙烯共聚乳液(VAE)为胶粘剂助剂，在实验室的条件下，采用“两步法”刨花模压工艺方法对材料进行模压，研究四种材料模压性能以及工艺参数和模压制品性能间关系的变化规律。
补充资料：工程图标准尺寸及坐标尺寸
标准标注类型，是我们常用的标注类型。而坐标标注是便于数控加工采用的另一中标注形式。PRO/E可以将两种标注方式进行转换。
· 3.2 标准标注到坐标标注的转换
注意： 转化为坐标标注的尺寸必须是线性标注的，下列尺寸不能转化为坐标标注：
- 被显示成线性尺寸的直径
- 中心线尺寸
- 选择MODIFY DRAW > Dim Params > Dim Type > Ordinate Dim > Create Base.
- 选择作为参考基准线的尺寸
- 选择基准的引出线，该点为0点
- 选择 MOD DIM TYPE > Lin to Ord .
- 选择线性尺寸：注意：必须选择具有相同基准的尺寸
========>>>>
1. 选择 DIM PARAMS > Diam Dim Type .
2.点击Ord to Lin 
3.选择尺寸即可
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条