1) unquenched and untempered die steel for plastic mould
非调质塑料模具钢
1.
The microstructure and composition of precipitated phase in unquenched and untempered die steel for plastic mould have been investigated using following techniques:TEM,AEM,EDS and chemical analysis.
利用电子显微镜技术、化学分析方法观察与分析了非调质塑料模具钢中微合金析出相的显微特征及成分。
2) Plastic Die Steel
塑料模具钢
1.
Research on Surface Roughness Characteristics of Plastic Die Steel in Magnetic Abrasive Finishing;
磁力研磨加工塑料模具钢的表面粗糙度特性研究
2.
Development and application of plastic die steels in China;
我国塑料模具钢的发展前景及应用现况
3.
Research on EDM Mechanics of the New Plastic Die Steel;
新研制塑料模具钢电火花加工机理研究
3) plastic mould steels
塑料模具钢
1.
The basic guiding thought of development of mould steels(in cold work,hot work and plastic mould steels) in the past,present and future at home and abroad was analyzed as well as some new type mould steels developed under the guide of this thought.
简要分析了过去、现在乃至今后国内外模具钢(冷作模具钢、热作模具钢和塑料模具钢)发展的基本指导思想及在此指导思想下研发的各种新型模具钢。
4) plastic mould steel
塑料模具钢
1.
ANSYS-based numerical simulation on laser transformation hardening for plastic mould steel;
基于ANSYS的塑料模具钢激光相变硬化数值模拟
2.
Macro-examination and micro-examination of the characteristics of the cavity on the polished mold surface made of an advanced imported mirror plastic mould steel were carried out.
对某进口高级镜面塑料模具钢制模具成品抛光后表面孔洞的宏观和微观特征进行了分析,测定了孔洞的尺寸和显微硬度,并针对孔洞微区进行了X射线元素面分析,同时分析了孔洞的形成过程。
3.
The developed model was utilized to analyze the temperature distribution and allowable maximum diameter of 3Cr17NiMo corrosion-proof plastic mould steel bar during air or oil quenching process.
利用该模型分析了3Cr17NiMo抗腐蚀塑料模具钢圆坯的淬冷温度场,计算了在不同淬冷介质条件下圆坯的最大许可直径。
5) Plastic mold steel
塑料模具钢
1.
Exactly using plastic mold steel is key of improving plastic mold quality.
塑料模具钢的正确使用是提高塑料模具质量的关键。
2.
In order to improve prehardened quality of plastic mold steel,prehardening process of big forged piece of the P20 steel was studied according to property request and its microstucture was observed with the JEM200CX electronic microscope.
为了提高塑料模具钢的预硬化质量,按性能要求,研究了P20钢大锻件的预硬化工艺,并用JEM-200CX
6) Corrosion Resistant Plastic Die Steel
耐蚀塑料模具钢
1.
Wear Resistance and Wearing Mechanism of Three Kinds of Corrosion Resistant Plastic Die Steel;
三种耐蚀塑料模具钢的耐磨性和磨损机理
补充资料:非调质钢
分子式:
CAS号:
性质:在轧制状态或正火状态下使用的高强度钢。其显微组织主要是铁素体和珠光体。提高非调质钢强度的方法,主要是通过添加合金元素和轧制,细化组织。常采用对于焊接性影响较小而又廉价的硅和锰作为非调质钢主要合金元素。通过控制轧制也可细化组织,提高非调质钢的强度和韧性。非调质钢的典型钢种有:(1)普通焊接结构用非调质钢,用途与软钢大致相同,包括桥梁、贮气罐、高压容器、建筑构件、升降机械和土木机械等;(2)造船用高强度钢;(3)煤气管道用高强度钢。
CAS号:
性质:在轧制状态或正火状态下使用的高强度钢。其显微组织主要是铁素体和珠光体。提高非调质钢强度的方法,主要是通过添加合金元素和轧制,细化组织。常采用对于焊接性影响较小而又廉价的硅和锰作为非调质钢主要合金元素。通过控制轧制也可细化组织,提高非调质钢的强度和韧性。非调质钢的典型钢种有:(1)普通焊接结构用非调质钢,用途与软钢大致相同,包括桥梁、贮气罐、高压容器、建筑构件、升降机械和土木机械等;(2)造船用高强度钢;(3)煤气管道用高强度钢。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条