1) polythioether
聚硫醚
1.
Three levextrel type extraction resins (EpⅠ,EpⅡ,EpⅢ) were synthesized by reaction of macroporous crosslinked polystyrene(E) with three kinds of oligomer polythioethers respectively.
以聚环硫丙烷等３种聚硫醚低聚物作萃取剂，用浸渍法将其填充在交联大孔聚苯乙烯树脂中制得３种萃淋树脂。
2.
Through interfacial polycondensation of bis(β-alkoxycarbonylalkyl)tin dichlorideswith various diacids,diphenols,diols and dithiols,a series of new orgallo-tin polyesters,polyethers and polythioethers were prepared.
双（β－烷氧羰烷基）二氯化锡与二酸、二酚、二醇、二硫醇通过界面缩聚反应，合成了一系列新的有机锡聚酯、聚醚、聚硫醚，新合成的聚合物可作为ＰＶＣ制品的热稳定剂使用。
3.
Extraction selectivity of some oligomer-extraetants having polythioether or polyether main chain and various functional groups in side chain for mixtures containing noble metal ions was studied.
本文研究了几种聚硫醚或聚氧醚为主链,在侧链上带不同取代基的低聚物作为萃取剂对某些贵金属—非贵金属离子混合体系和二种或三种贵金属离子混合体系的萃取选择性,先后使用聚氧醚和聚硫醚进行分步萃取,较好地实现了金-钯-铂体系中三个组份的分离。
2) polyphenylene sulfide
聚苯硫醚
1.
Development of polyphenylene sulfide powder coating;
耐热耐腐蚀聚苯硫醚粉末涂料
2.
Application and development of polyphenylene sulfide and fiber;
聚苯硫醚及其纤维的开发与应用
3.
Study on rheological behavior of polyphenylene sulfide;
聚苯硫醚的流变性能研究
3) poly(phenylene sulfide)
聚苯硫醚
1.
Determination of relative molecular mass distribution of poly(phenylene sulfide) using computer simulations;
聚苯硫醚相对分子质量分布的计算机模拟测定
2.
Morphologies of isothermal crystallized pure poly(phenylene sulfide) and fiber-reinforced poly(phenylene sulfide) composites;
聚苯硫醚及其纤维增强复合材料的等温结晶形态
3.
The analysis of poly(phenylene sulfide)film;
聚苯硫醚薄膜的初步分析
4) PPS
[英][,pi: pi: 'es] [美]['pi 'pi 'ɛs]
聚苯硫醚
1.
Study of Toughening of PPS by Organic Rigid Particle;
有机刚性粒子增韧聚苯硫醚的研究
2.
Influence of Blend and Composite on Crystallization Formation of PPS;
共混和复合对聚苯硫醚结晶形态的影响
3.
RESEARCH AND APPLICATION OF PPS BLENDS;
聚苯硫醚复合材料的研究和应用
5) polyphenylene sulfide(PPS)
聚苯硫醚
1.
Several purification methods for polyphenylene sulfide(PPS) including solvent wash,dry distillation in vacuum and their mechanisms are introduced in this paper.
介绍了近年来国内外聚苯硫醚的各种纯化工艺(如溶剂洗涤纯化、真空干馏纯化等工艺)及纯化机理,并展望了纯化聚苯硫醚在电子电气产品、防腐涂层、电子封装材料及其他领域的特殊用途。
2.
Polytetrafluoroethylene(PTFE)-filled and bentonite-reinforced polyphenylene sulfide(PPS) composites were prepared by compression molding.
通过模压成型制备出聚四氟乙烯(PTFE)和蒙脱土填充的聚苯硫醚(PPS)复合材料,研究了PTFE与蒙脱土的单独和协同作用对PPS摩擦磨损性能的影响。
3.
An excellent heat-resisting,anti-corrosion and conductive coating has been firstly obtained by mixing polyfluorinated ethylene propylene(FEP) with polyphenylene sulfide(PPS) and carbon compound fillers.
采用聚全氟乙丙烯和聚苯硫醚树脂共混改性,用炭系混合物为导电填料研制耐热、耐腐蚀和导电(导热)涂料。
6) Polyarylene Sulfide
聚芳硫醚
1.
Study and Industrialization of Polyarylene Sulfide;
聚芳硫醚类树脂的研究及其产业化
补充资料：聚硫醚系离子导电高分子
分子式：
CAS号：
性质： 指具有如下硫醚结构的聚合物：-CH2-S-CH2-其中硫原子处在聚合物主链上，作为配位原子可以与多种金属阳离子产生强相互作用，对离子型化合物起增强溶解作用和使离子对解离。聚硫醚的线性饱和链增强聚合物的柔性，对提高离子的定向迁移能力有利。聚硫醚需与金属盐复合制备固体电解质。
CAS号：
性质： 指具有如下硫醚结构的聚合物：-CH2-S-CH2-其中硫原子处在聚合物主链上，作为配位原子可以与多种金属阳离子产生强相互作用，对离子型化合物起增强溶解作用和使离子对解离。聚硫醚的线性饱和链增强聚合物的柔性，对提高离子的定向迁移能力有利。聚硫醚需与金属盐复合制备固体电解质。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条