1)  Ilmenite beneficiation
钛铁矿选矿
2)  Ferrotitanium
钛铁
1.
Rapid analysis of titanium content in ferrotitanium by diantipy rylmethane photometric method;
二安替比林甲烷光度法快速分析钛铁及钛芯线中钛
2.
Spectrophotometric determination of titanium in ferrotitanium with chromotropic acid;
变色酸光度法测定钛铁中钛
3.
Based on the features of Panzhihua titanium concentrate,the reasons why titanium recovery is low and aluminum consumption is high when ferrotitanium is smelted in alumino-thermic process were analyzed.
结合攀枝花钛精矿的特点，探讨了采用铝热法冶炼钛铁时钛回收率低、铝耗量高的原因，并提出了相应的解决措施。
3)  High Titanium Ferroalloy
高钛铁
1.
The situation of smelting high titanium ferroalloy in the laboratory is briefly introduced.
简述了实验室条件下用铝热法冶炼高钛铁(Ti>65%)的情况,讨论了影响钛回收率的主要素。
2.
At present producing of high titanium ferroalloy mainly.
高钛铁是一种用途较为广泛的特种铁合金,是冶炼铁基高温合金和优质不锈钢不可缺少的材料,尤其是在提高军用、航空等高级合金钢的质量方面有着不可取代的作用。
4)  titaniferous iron concentrate
钛铁精矿
1.
High iron and low silica sintering techniques of titaniferous iron concentrate;
含钛铁精矿高铁低硅烧结技术
5)  Ilmenite
钛铁矿
1.
Microreaction mechanism of the reduction of ilmenite to iron by H_2~+ ion implantation;
H_2~+注入法研究钛铁矿还原微观机理
2.
The recovery of the fine particle ilmenite in Panzhihua;
攀枝花微细粒级钛铁矿的回收
3.
Research on Panzhihua ilmenite flotation by using TAO collector series;
TAO系列捕收剂选别攀枝花钛铁矿的研究
6)  V-Ti containing molten iron
钒钛铁水
1.
During the smelting process for V-Ti containing molten iron,we can increase the convertor life by improve the walling up technology,using the one-go operation,decreasing the tapping temperature,restructurding the slag system and improving the effectivensee of slag-splashing for protecting of converter and so on.
介绍了承钢采用双联工艺,在用含钒钛铁水炼钢生产过程中通过改进砌炉工艺,执行一次拉成出钢操作,降低出钢温度,改造渣系,提高溅渣护炉效果等措施的实施大幅度提高转炉炉龄,为不同生产条件下提高炼钢炉龄提供了借鉴。
参考词条
补充资料：蚀变钛铁矿
分子式：
CAS号：

性质：钛铁矿的高度蚀变产物，又称蚀变钛铁矿(weathered ilmenite)。化学式TiO2·nH2O，TiO2。最高含量约94%(经验值)，密度3.5～4.5g/cm3。莫氏硬度4～5.5级。颜色为黄灰色到褐色，它实际上不是一种独立的矿物，而是隐晶质锐钛矿物、金红石、板钛矿、赤铁矿(偶尔还有榍石)的混合物，贮量不大，主要产于澳大利亚。可与钛铁矿、金红石混合成TiO2含量60%～70%的混合矿，用于生产氯化法二氧化钛颜料等。 

说明：补充资料仅用于学习参考，请勿用于其它任何用途。