1) Fe-Cr-Ni alloy
铁-铬-镍合金
1.
The Fe-Cr-Ni alloy lined composite pipes have been produced by the SHS centrifugal process and the corrosion resistance of the Fe-Cr-Ni alloy have been studied.
利用ＳＨＳ—离心法制备铁－铬－镍合金内衬复合钢管，系统研究内衬层的耐蚀性能。
2) Fe-Cr-Nialloy
铁铬镍合金
3) Fe-Cr-Ni phase
铁铬镍合金相
1.
The results showed that the failure of elongation was caused by large amount of Fe-Cr-Ni phase.
结果表明,由于大量析出铁铬镍合金相导致了此钢种的伸长率不合格;提高镍含量能有效降低铁铬镍相的析出,从而提高伸长率的合格率。
4) Iron
铁
1.
Quick Determination of Iron,Copper,Zinc and Lead in Cadmium Nitrate by Flame Atomic Absorption Spectroscopy;
硝酸镉中铁铜锌铅的FAAS快速分析测试技术
2.
Determination of trace iron in water by ion exchange resin phase spectrophotometry;
离子交换树脂相分光光度法测定水中痕量铁
5) Fe(Ⅲ)
铁（Ⅲ）
1.
Study on the Colour Reaction of Fe(Ⅲ) with a new Colour Reagent 8Quinine Azo Quercetin LEI LiHong LEI ChunHua (Department of Analytical Chemistry,Hunan Medical College,Changsha 410006,P.
此法用于茶叶中微量铁（Ⅲ）的测定，结果令人满意。
2.
Based on the fact that Fe(Ⅲ)react with Vitamin B 6 to form the brown-yellow coordination compound,a simple and convenient method was established which can determine Vitamin B 6 in medicine by spectrophotometry and the rate of recovery can reach 96.
基于铁（Ⅲ）与维生素Ｂ６形成棕黄色配合物，本文利用分光光度法探讨了一种简便、快速测定药物中维生素Ｂ６的方法。
6) Fe
铁
1.
Detection for Fe Zn Contents in Wine Ren jiandin;
葡萄酒中铁和锌含量的测定
2.
Determination of Co,Cr,Fe,Mn,Mo,Ni,Ti in PTA by DUO-ICP-AES;
DUO-ICP-AES测定精对苯二甲酸中的钴、铬、铁、锰、钼、镍、钛
3.
Study on the Determinations of Ni,Fe,Mo,Mn and B in Ti/TiC Composite Material by Atomic Emission Spectrometry;
发射光谱法同时测定钛基复合材料中的镍铁钼锰和硼的研究
参考词条
补充资料：铁镍铬系定膨胀合金
分子式：
CAS号：
性质：在一定温度范围内具有恒定膨胀系数的铁镍铬合金。含有42％～56％镍和5％～6％铬，余量为铁。可以通过改变镍或铬的含量调节热膨胀系数，使其能与一定的软玻璃或其他材料封接。加入铬还可以改善封接性能。主要牌号是Ni42Cr6和Ni47Cr5。
CAS号：
性质：在一定温度范围内具有恒定膨胀系数的铁镍铬合金。含有42％～56％镍和5％～6％铬，余量为铁。可以通过改变镍或铬的含量调节热膨胀系数，使其能与一定的软玻璃或其他材料封接。加入铬还可以改善封接性能。主要牌号是Ni42Cr6和Ni47Cr5。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。