1) enthalpy relaxation
热焓松弛
1.
Nonlinear curve fitting of the enthalpy relaxation of polysiloxane modified epoxy resins;
有机硅改性的环氧树脂热焓松弛非线性拟合
2.
The isothermal and dynamic enthalpy relaxation behaviors of polyetherimide were studied by using DSC, and the data obtained were non linear fitted with the KWW function.
采用ＤＳＣ对不同分子量的聚醚酰亚胺的等温及动态热焓松弛行为进行了研究，并以ＫＷＷ方程对实验数据进行了非线性拟合。
3.
The enthalpy data of modified epoxy ageing at 150℃ show that the extent and rate of enthalpy relaxation are closely related to the end group of the modifiers.
改性及未改性的环氧体系在150℃的热焓松弛数据表明：该体系的松弛程度及松弛速率与聚醚酰亚胺端基有密切的关系。
2) thermal relaxation
热松弛
1.
The thermal relaxation of coherently strained GexSi1-x films grown by molecularbeam epitaxy on Si(100) is studied by cross-section transmission electron microscopy (XTEM) and high-resolution latticeimaging TEM.
使用分子束外延（ＭＢＥ）技术制备了应变锗硅外延薄膜，并在不同温度下对样品等时热退火处理；采用侧面透射电子显微镜（ＸＴＥＭ）对退火样品进行观测，获得有关高温退火后锗硅外延层与硅衬底界面的位错生长情况，采用高分辨电子显微镜（ＨＲＥＭ）观测样品退火以前的界面显微结构，表明样品在８５０℃退火温度时出现的位错生长是一种混合型热松弛机理。
2.
The surface residual stress field of the allay was determined by X-ray diffraction method,and thermal relaxation behavior of residual stress of the alloy aged at 150,300 ℃ was studied.
使用X射线衍射仪分析了表层压应力场特征,研究了150℃和300℃保温过程中的残余应力热松弛规律。
3) heat treatment without tension
松弛热处理
4) relaxation heat setting
松弛热定型
1.
The key factors affecting the product quality include silicone oil quality and concentration, oiling methods, the equipments and process conditions of relaxation heat setting state.
探讨了在 15 kt/ a直纺生产线上生产硅油整理三维卷曲中空涤纶短纤维工艺技术 ,结果表明 :硅油质量 ,调制浓度 ,上油方式 ,松弛热定型的设备及工艺状况均是影响产品质量的关键因
5) Dipolar thermal relaxation
偶极热松弛
1.
The behavior of dipolar thermal relaxation of γ-irradiated poly(ethylene terephthalate)(PET) is studied by the method of TSC.
短路热释电流温度谱显示α峰随辐照剂量增大向低温移动,被冻结的大分子主链链段偶极热松弛活化能和热松弛时间常数受辐照剂量的影响较小。
6) thermal relaxation time
热松弛时间
1.
Lord and Shulman (L-S) introduced one thermal relaxation time and Green and Lindsay (G-L) introduced two to establish generalized thermoelastic theory respectively.
L-S理论是通过引入了一个热松弛时间,G-L理论是通过引入两个热松弛时间,建立了广义的热弹性理论,其目的都是为了消除无限的热传播速度。
2.
The effects of moving heat source speed,temperature-dependent modulus of elasticity and thermal relaxation time on displacement and temperature are studied.
计算得到了杆内温度及位移的分布规律,分析了移动热源速度、弹性模量以及热松弛时间对温度和位移的影响。
补充资料：负温度系数热敏电阻陶瓷(见热敏陶瓷)
负温度系数热敏电阻陶瓷(见热敏陶瓷)
thermo-sensitive ceramics with negative temperature coefficient
负温度系数热敏电阻陶瓷thermo一sensitiveeeramies with negative temperature eoeffieient在某一特定温度范围，电阻率随温度的升高而明显减小的热敏陶瓷。简称NTC陶瓷。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条