说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 管线油
1)  pipeline oil
管线油
1.
Antirust emulsified oil may be formulated by choosing suitable pipeline oil as base oil and adding certain amount of emulsifier, antirust agent, stabilizer and auxiliary solvent.
选择合适的管线油作基础油,加入适量的乳化剂、防锈剂、稳定剂和助溶剂,可制得防锈乳化油。
2)  oil transmission pipeline
输油管线
1.
The Physical Chemical Cleaning the Pu-lin Oil Transmission Pipeline before Changing into Nature Gas Trausmission Pipeline;
濮—临输油管线改输天然气前的物理化学清洗
2.
The oil transmission pipeline course is a practical course,so students must have both the technique and the managerial and instructive ability.
输油管线课程实践性强,要求学生技术精、能力强、懂管理、会指挥。
3)  petroleum pipeline
输油管线
1.
The concatenate structures capability of petroleum pipeline were experimented.
对输油管线连接结构的性能进行了实验,发现采用普通连接器连接管线时,管子极限承载能力与抗弯能力此普通连接器强;穿越连接器的承载与抗弯能力比管线的强;对于承插式连接管线的抗弯、抗拉性能都优于普通连接器、穿越连接器连接的管线,但其穿越水域时受到的作用力也比其他连接方式的管线大,必须通过计算分析比较才能确定承插式与穿越连接器连接管线穿越水域的适应能力。
2.
Its important functions in the operation and control of petroleum pipeline are indicated.
介绍了仿人智能控制的基本原理,指出它在输油管线运行控制中的重要作用,并详细分析了仿人智能控制在输油管线工况调节和控制、管线泄漏检测、安全储运等方面的应用。
4)  oil pipeline
输油管线
1.
Remote fault diagnosis system for oil pipelines;
应用于输油管线的远程故障诊断系统
2.
Oil pipeline crude oil temperature circuit monitor system;
输油管线原油温度巡回监测系统
5)  oilfield pipeline
油田管线
1.
An introduction is given to the new technology on detection and assessment of the anticorrosive technology in oilfield pipelines based on the simulation test installation of corrosive pipe flow state and pilot base of the anticorrosive technology on-site.
介绍了以腐蚀管流动态模拟试验装置和防腐技术现场中试基地为基础的油田管线内防腐技术检测、评价新技术。
6)  Pipeline [英]['paɪplaɪn]  [美]['paɪp'laɪn]
油气管线
1.
The Monitoring System and the Analysis of Locating Theory for Pipeline Leakage Detection Based on Single Distributed Optical Fiber Sensor;
利用Sagnac干涉原理的分布式光纤传感器是一种可用于长途油气管线侵入、泄漏探测和定位的新技术。
补充资料:皂化溶解油、肥皂油和调水油
分子式:
CAS号:

性质:又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂(如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂)和少量稳定剂(如乙醇或甲醇)而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主,润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条