1) acrylic polyester
丙烯酸聚酯
1.
A modified one pack aluminium metallic acrylic polyester paint based on polyester resin as main film former has been developed to meet the market demand, which has the features of low cost and good appearance to enhance its competitive power in market and economic benefit.
根据市场竞争的需求，研制出以聚酯树脂为主要成膜物，再加以改性的单组分银白色丙烯酸聚酯金属漆。
2) polyacrylates
聚丙烯酸酯
1.
Research on the Polyacrylates Used as Pretreating Agent of Nickel Plating on Plastics;
聚丙烯酸酯作为塑料化学镀镍预处理剂的研究
2.
Quantum Chemistry-ANN Methods Study on Tg of Polyacrylates;
聚丙烯酸酯类T_g的量子化学-神经网络研究
3.
The GPC/RI-DV-RALLS Multi-detection technique was used to measure solution property of nonlinear optical polymer,substituted polyacrylates and carefully investigated the influence of the rigid conjugated side-chain structure and the linked flexible chain structure between rigid conjugated group and major-chain on the characteristic viscosity,unperturbed dimensions 0/M and Flory's.
采用凝胶渗透色谱示差折光指数(RI)/黏度(DV)/激光光散射(RALLS)三检测联用技术,研究了非线性光学聚合物———侧链型聚丙烯酸酯的溶液性质,详细分析了侧链刚性共轭结构以及刚性共轭基团与主链之间连接链的方式与结构对高分子特性粘数、均方旋转半径0/M和Flory特征比C∞的影响。
3) polyacrylate
聚丙烯酸酯
1.
Synthesis and Application of Polyacrylate/Inorganic Oxide Hybrids;
聚丙烯酸酯/无机氧化物型杂化材料的合成与应用
2.
Study on fluorescence modulation of rare-earth-containing polyacrylates;
含稀土配合物的聚丙烯酸酯的荧光可调控性能研究
3.
Development ofpolyacrylate emulsion pressure-sensitive adhesive used for bandage;
绷带用聚丙烯酸酯乳液型压敏胶的研制
4) poly-acrylate
聚丙烯酸酯
1.
Synthesis and characterization of poly-tetrafluoroethylene modified poly-acrylate latexes;
聚四氟乙烯改性聚丙烯酸酯乳液的制备与表征
2.
Studies on EP828/mXDA system toughened with poly-acrylate liquid rubber;
聚丙烯酸酯液体橡胶增韧环氧树脂体系研究
5) Acrylic resin
聚丙烯酸酯
1.
Nano-SiO_(2)/acrylic resin composite latex was synthesized in the presence of nano-SiO_(2),which was modified by silane coupling agent.
以经过硅烷偶联剂表面改性的纳米S iO2为种子,制备了纳米S iO2/聚丙烯酸酯复合乳液及其涂层;FT-IR分析表明,纳米S iO2/聚丙烯酸酯复合涂层兼具纳米S iO2和聚丙烯酸酯涂层的特征吸收峰;热分析结果表明,加入质量分数为3%的纳米S iO2后热分解速率最大的温度(413℃)比聚丙烯酸酯(350℃)提高了60℃以上;通过计算得到S iO2质量分数为3%样品的热降解活化能为298。
2.
In situ emulsion polymerization was carried with ultramicro SiO 2 as core and the acrylic resin as shell.
采用超微细SiO2 粒子作为种子进行聚丙烯酸酯的乳液聚合 ,初步探讨了此类种子乳液聚合的过程 ,分析了包覆机理 ,讨论了SiO2 用量对聚合反应速率及残渣生成率的影响。
3.
s:SiO 2/ACR composite was synthesized by acrylic resin of in suit emulsion polymerization using nano SiO 2 particle as core treated with MAPS and acrylic resin as shell; then made ultimately.
用经甲基丙烯酰氧基丙基三乙氧基硅烷 (MAPS)处理过的纳米SiO2 作种子 ,进行聚丙烯酸酯(ACR)的原位乳液聚合 ,制成了MAPS -SiO2 /ACR复合物 ;探讨了种子乳液聚合的过程 ,分析了包覆机理 ,讨论了SiO2 的用量对聚合反应速率及残渣率的影响。
6) polyacrylic ester
聚丙烯酸酯
1.
Study on the damping property of the polyacrylic ester materials;
聚丙烯酸酯类材料的阻尼性能研究
2.
This article deals with the synthesis and characterization of epoxy-polyacrylic ester IPN emulsion.
主要讨论环氧树脂-聚丙烯酸酯互穿网络乳液的合成及其表征。
3.
Here we classify the research achievement these years into about seven categories just as follows: HA series resins, HB-H-6 resin, chitosan series resins, polyacrylic ester resins, β-cyclodextrin series resins, affinity membrane series and so on, and then make an overview respectively.
现将近年来胆红素树脂吸附材料归纳为:HA系列,HB-H-6树脂,壳聚糖系列,聚丙烯酸酯系列,β-环糊精系列,亲和膜等系列,并分别对其进行综述。
补充资料：丙烯酸聚酯木器漆
分子式：
CAS号：
性质：一种双组分木器漆，组分一为丙烯酸改性不饱和聚酯、促进剂及有机溶剂，组分二为丙烯酸改性醇酸树脂、催化剂及有机溶剂，使用时按比例混匀，该漆自然干燥，漆膜丰满、光泽好，硬度高，附着力好，耐寒、耐热性好，适用于钢琴、家具等木制品的涂装。
CAS号：
性质：一种双组分木器漆，组分一为丙烯酸改性不饱和聚酯、促进剂及有机溶剂，组分二为丙烯酸改性醇酸树脂、催化剂及有机溶剂，使用时按比例混匀，该漆自然干燥，漆膜丰满、光泽好，硬度高，附着力好，耐寒、耐热性好，适用于钢琴、家具等木制品的涂装。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条