1) water ejection
深层穿透
2) deep penetration
深穿透
1.
Developed is a HSD89 perforator integrating high shot density and deep penetration together.
分析了影响深穿透射孔器穿深性能的装枪孔密、射孔弹排列结构、弹间干扰、枪内炸高、射孔弹装药结构和药型罩等因素,阐述了在高孔密条件下弹间干扰对射孔器性能的影响及炸高对射孔弹性能的影响。
2.
With the oilfield exploitation going into the stage of higher water-cut,in order to achieve the effective excavation of remaining oil in new step-out wells and local infilling wells,and fully develop the formation production,it is more and more important to develop and improve big diameter and deep penetration perforation completion technology.
随着油田开采进入高含水期,为了实现新投扩边区块以及局部加密井点剩余油的有效挖潜,充分发挥地层产能,不断发展完善大孔径、深穿透射孔完井工艺就显得越来越重要。
3.
The technology uses deep penetration perforation charge with high perforation density and large perforation diameter and surging perforation with greater pressure differential.
它采用高孔密大孔径深穿透射孔弹和大压差抽吸炮眼清洗技术,不仅能提高油井产能,解除近井带污染,还可以改善防砂完井效果。
3) deep-penetration
深穿透
1.
X-ray photograph analyses of jet flow produced by a perforating charge with big-hole and deep-penetration show that higher velocity of jet flow disc is beneficial to improve hole diameter and penetration depth of the charge.
通过对大孔径、深穿透射孔弹的X光片的分析,认为较高的射流圆盘速度对射孔弹提高射孔孔径以及穿透深度均有好处。
4) penetration depth
穿透深度
1.
The penetration depth at 0 K can be attained as: λ0=265 nm for YBCO/LAO and λ0=280 nm for YBCO/MgO.
通过测量微带谐振器的共振频率、有载品质因数、插入损耗与温度之间的依赖关系,分析了超导薄膜的微波特性,获得了超导薄膜在绝对零度时的穿透深度λ0。
2.
The results show that the maximum penetration depth of gas flow is increased with the increase of gas momentum while the diameter of oxigen gunjet keeps constant.
研究表明,当喷枪直径一定时,气体的最大穿透深度随气流动量通量的增加而增大,当动量通量相同时,液体的黏度越大,气体的最大穿透深度越小。
3.
According to Maxwell equation and HagenRuben formula, the absorptivity and the penetration depth in metal of Nd:YAG laser(1.
6μm)在金属中的吸收率和穿透深度,并做了Nd:YAG激光与CO2激光的熔敷试验比较。
5) Penetration length
穿透深度
1.
The transmission spectrum of the SU-8 photoresist in the near UV is analyzed to get the penetration length of the different wavelengths UV in SU-8.
通过对SU 8胶近紫外波段下透射光谱的分析,得到不同波长近紫外光在SU 8胶中的穿透深度,并分析了不同波段近紫外光对SU 8胶微结构的影响,结果表明穿透深度大的近紫外波段曝光出来的图形质量好,深宽比大,侧壁陡直。
2.
As a new injection molding technology, avoiding the breakthrough phenomenon of core melt, obtaining longer penetration length on skin melt and good uniformity of core melt in sandwich injection molding are quite significant for its application as well as theoretic study of sandwich injection molding.
夹芯注射成型作为一种新型的注射成型技术,如何避免芯层熔体前缘冲破现象的出现、获得具有较大芯层熔体穿透深度以及均匀层厚分布的产品对于它的实际应用和理论研究具有极为重要的意义。
3.
How to avoid the breakthrough phenomenon of core melt and increase the content of core material in the injection molding process, and obtain the product with high penetration length of core melt, uniformity of distribution for core material and small warpage are of great significance for practical production, application research and theoretical research.
在注射成型过程中,如何避免芯层熔体前缘突破,增加芯层物料的填充量,获得具有较大熔体穿透深度以及层厚均匀分布、翘曲变形小的制品,对于指导实际生产、应用和理论研究都有十分重要的意义。
补充资料:多介质深层过滤器
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条