1) second phase
第二相组织
1.
The influence of chemical composition and second phase on wear resistance of cast steel with spheroidal graphites was studied quantitatively to provide technical basis for rational use of the new material and quality control in production.
主要研究成分及第二相组织对球墨铸钢耐磨性的定量影响规律，从而为合理应用这一新材料和生产中的质量控制提供技术依据。
2) minor microstructure
第二组织
1.
By proper heat treatment after deformation the scattered minor microstructures of cementite and pe.
经适当的后续处理后,渗碳体、珠光体等第二组织弥散分布于细晶铁素体晶界上,使Q235低碳钢在保持细晶钢原有强度级别和塑性的基础上,屈强比有效降低。
3) second element
第二组分
5) second phases
第二相
1.
The results show that the strength and fracture toughness of the two kinds of composites are increased by the addition of the second phases, WC and ZrO2.
结果表明:第二相WC、ZrO_2弥散分布于Al_2O_3中可明显改善复合材料的强韧性;Al_2O_3-WC-ZrO_2和Al_2O_3-WC陶瓷材料的强度分别为820MPa和510MPa,韧性分别为8。
6) second phase
第二相
1.
Coarsening of the second phase in directionally solidified Al-Bi monotectic alloys;
定向凝固A1-Bi偏晶合金中第二相的粗化行为
2.
Relationship between the second phase and R phasetransformation in NiTi(X) alloys;
NiTi(X)合金中第二相与R相关系研究(英文)
3.
The results show that adding Nb to HS690 filler metal will improve the quantity and morphology of the second phase(Nb,Ti)C in grain boundaries,the condition of grain boundaries and DDC susceptib.
结果表明,在焊接工艺条件相同的情况下,采用向HS690焊丝中添加Nb的冶金方法能够调整晶界处第二相(Nb,Ti)C的数量和形态,晶界条件得到改善,HS690熔敷金属抗DDC的能力得到明显的提高。
补充资料：第二相
secondaryphase：不同于母相或单相基体的、与其有区别的相。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条