说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 疏松压实
1)  Consolidation of Loose Structure
疏松压实
2)  loose compaction
疏松压制
3)  low pressure unconsolidated oil?bearing formation
低压疏松油层
1.
Because of enhanced recovery by electric pump or large?capacity pump and increment of producing pressure drop, the sand producers are increased by a wide margin year by year in Es 1 and Es 2 low pressure unconsolidated oil?bearing formations and heavy crude formations of Xianhezhuang and Wangjiagang oilfields in Shengli petroliferous province.
由于电泵大泵强采 ,生产压差增大 ,胜利油区现河庄油田和王家岗油田沙一、二段低压疏松油层和稠油层出砂井和酸化后出砂井逐年大幅度增加。
4)  compression osteoporosis
压缩性骨质疏松
1.
In order to cure vertebral compression osteoporosis,a difficult problem in medical science, a deformable steel reticulation device (GWQ device for short) is experimented to be embedded into human spine.
医学界为攻克脊柱压缩性骨质疏松难题,试图应用一种钢质网状可变球型(简称GWQ)机构,将其植入人体脊椎,通过有效变形达到支撑已经压缩的脊椎、恢复人体原高度之目的。
5)  porosity [英][pɔ:'rɔsəti]  [美][pɔ'rɑsətɪ]
疏松
1.
Effect of electric current pulse on shrinkage cavity and porosity in casting ZA27 alloy;
脉冲电流对铸造ZA27合金中缩孔和疏松的影响
2.
Factor Analysis and Countermeasures of Porosity and Pipe in Ingot;
钢锭疏松、缩孔的因素分析及对策
3.
In this paper, analysis on the fissuring accident of ZGMn13Cr2Mo antifriction tup is performed, and the reason is believed to lie in serious casting defects of shrinkage cavity, porosity and inclusion.
对ZGMn13Cr2Mo耐磨锤头的断裂事故进行了分析,主要原因是存在着严重的铸造缺陷:缩孔、疏松和夹杂物。
6)  Looseness [英]['lu:snis]  [美]['lusnɪs]
疏松
1.
Results indicate that the primary cause to the rupture of the screw in the process of torque force test is proved to be heavily existence of holes and pore gaps in the screw arising from the central looseness of the original billet.
结果得出:螺钉在扭力试验过程中断裂是由于内部存在严重的孔洞和孔隙所造成的,孔洞和孔隙来源于原铸坯的中心疏松。
2.
Mechanism of central parosity and looseness of small billet is described and analysed.
简述小方坯中心缩孔和疏松的形成机理 ,提出减轻中心缩孔和疏松的措
3.
The experimental results show that there are some internal metallurgy flaws such as looseness,shrink hole in the raw material of the axle,and bad widmanstatten structure from the overheating and over-burning during the heating of forging,the comprehensive effects of these factors cause the steel toughness to reduce,and the internal cleavage exists d.
结果表明,车轴轴头原材料中存在疏松、缩孔残余等内部冶金缺陷和锻造热加工中的过热和过烧产生不良的魏氏组织,这些因素的综合作用致使钢的韧性降低,在锻造中发生内部劈裂,最终造成轴头在受外力时脆性断裂。
补充资料:激波压实
分子式:
CAS号:

性质:又称激波固结或激波压实。利用滑移爆轰波掠过试件所产生的斜入射激波,使金属或非金属粉末在瞬态高温、高压下发生烧结或合成的一种高技术。爆炸烧结是烧结非晶、微晶等新型材料最有发展前途的技术。可使脆性材料达到比常规方法高得多的性能。与化学放热反应相结合可大幅减少或消除陶瓷、超硬、高强度材料在室温下爆炸所难避免的宏观和微观裂纹,提高材料的烧结制品的密度和强度。爆炸烧结按加载方式不同可分为三类:平面加载、柱面加载和高速锤锻压等三种方法。工业上用此技术进行非晶磁粉末烧结、陶瓷材料、铝-锂合金制取等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条