1) powder-pointed coating machine
粉点涂层机
1.
After few years improvement, the domestic powder-pointed coating machine has the ad-vantage as follows: steady motion, easy to control the temperature of hot-roller, fine en-graving technical, easy to adjust the powder value, strength evenness etc.
国产粉点涂层机经多年改进,已具有运行稳定、热辊控温方便、表面温差小、雕刻辊加工精细、粉量调节控制简易、张力均匀等特点,能基本达到粉点粘合衬生产工艺的要求。
2) powder point coating
粉点涂层
3) powder dot coating,powder-point coating
粉点法涂层
4) powder-point machine
粉点涂覆机
5) paste dot coating line
浆点涂层机
6) coated powder
粉末涂层
1.
In order to improve the wear resistance of traditional coating tools, two kinds of advanced cutting tools which can be re ground have been developed with ceramic coated powders by the sol-gel and hot pressing technology.
为了提高传统涂层刀具的抗磨损性能 ,利用溶胶 -凝胶技术研制成功了两种新型粉末涂层陶瓷刀具。
补充资料：预涂层真空过滤机
产品名称 | 型号 | 主要技术参数 | 外型尺寸 （长×宽×高）mm | 地基尺寸 | 地脚螺栓 | ||||||
过滤面积(m2) | 转鼓直径(m) | 浸入角（o） | 转鼓转速(r/min) | 电机总功率(kw) | A | B | C | ||||
JGS转鼓 真空过滤机 | G2/1 | 2 | 1 | 120 | 0.13-2 | 1.1 | 1790×1550×1250 | 780 | 1080 | 1200 | M30 |
G2/1-X | 2 | 1 | 120 | 0.13-2 | 1.1 | 1790×1550×1250 | 780 | 1080 | 1200 | M30 | |
G5/1.75-X | 5 | 1.75 | 120 | 0.13-2 | 1.5 | 2500×2260×2460 | 1060 | 1420 | 1950 | M30 | |
G5/1.75 | 5 | 1.75 | 120 | 0.13-2 | 1.5 | 2500×2260×2460 | 1060 | 1420 | 1950 | M30 | |
JGF预涂层 转鼓真空 过滤机 | GF10/1.6-N | 10 | 1.6 | 140 | 0.3-3 | 1.5+0.37 | 3380×2690×2170 | 2480 | 2830 | 1680 | M24 |
GF20/2.2-N | 20 | 2.2 | 140 | 0.3-3 | 1.5+0.37 | 4460×3480×2930 | 3510 | 3860 | 2380 | M24 | |
GF30/2.7-N | 30 | 2.7 | 90-140 | 0.3-3 | 2.2+0.37 | 5100×4300×3850 | 4100 | 445 | 3000 | M24 | |
GF40/2.7-N | 40 | 2.7 | 90-140 | 0.3-3 | 3+0.37 | 7100×4300×3850 | 6100 | 6450 | 3000 | M24 | |
GF50/2.7-N | 50 | 2.7 | 90-140 | 0.3-3 | 3+0.37 | 7400×4250×3850 | |||||
JGD折带 (可利刀) 卸料转鼓 真空过滤机 | GD10/1.6-N | 10 | 1.6 | 140 | 0.13-0.79 | 2.2+0.37 | 3380×3700×2170 | ||||
GD20/2.6-N | 20 | 2.6 | 90-133 | 0.13-0.79 | 3+0.37 | 4960×4100×3310 | |||||
GD30/2.7-N | 30 | 2.7 | 90-133 | 0.13-0.79 | 3+0.37 | 5100×5800×3850 | |||||
GD40/3.0-N | 40 | 3.0 | 90-133 | 0.13-0.79 | 3+0.37 | 6570×4500×3410 | |||||
GD45/3.0-N | 45 | 3.0 | 90-133 | 0.1-0.7 | 3+0.37 | 6630×4500×3410 | |||||
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条