说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 充水
1)  water filling
充水
2)  controlled water
充水
1.
The quantitative relationship of the forecast to differential settlement of annular wall foundation of controlled water tests to preload large oil tanks is reserched and expounded briefly.
对大型油罐软弱地基充水预压试验中环墙基础不均匀沉降预测的定量关系作研究和简述 ;根据实测沉降资料 ,采用回归分析 ,提出了预测关系式 ,并对预测的主要影响因素作了具体分析。
3)  Water-filling
充水
1.
Base on the Saint-Venant equation and priessmann difference,a mathematical model which a- dopted virtue discharge method and slot method for simulating continuous water-filling in Long-distance water transfer system is build.
本文在圣维南方程基础上,采用假想窄缝法和虚拟流量法,并运用稳定性高的 Priess- mann 隐格式建立长距离串联输水管线的连续充水数学模型。
4)  water filling source
充水水源
1.
Based on comprehensive analysis of Taiping coalmine hydrogeological condition and water outlet lithologic characteristics,through contrastive analysis of borehole water prospecting drainage and water sample tested data considered that the indirect water filling source of +700 level belt inclined winze may come from Mosuo River.
在综合分析太平煤矿井水文地质条件、出水点岩性特征的基础上,通过钻孔探放、水样化验资料的对比分析,认为该矿+700水平胶带暗斜井的间接充水水源可能来自摩梭河;基于涌水点位置与出水量,以及瞬变电磁法确定的巷道前方富水区域情况,确定了采用浅层注浆法封堵的治水方案。
2.
After analyzed the hydrogeological data from Baibu minefield,considered that the water filling sources of shallow part Nos.
通过对白布井田水文地质资料的分析研究,认为浅部6上、6中、7号煤层开采时充水水源为顶板进水的长兴组岩溶裂隙水、含煤地层裂隙水、滑坡体中的孔隙水;充水通道主要为裂隙、岩溶管道、导水裂隙带、断层带。
5)  water filling factor
充水因素
1.
based on fully analyzed the hydrogeological condition and mine water filling factors,estimated water conducted fracture zone height activated by the mining of No.
在全面分析大雁矿业集团公司雁南煤矿北二采区的水文地质条件及煤层开采矿井充水因素的基础上,计算了开采271号煤层时导水裂隙带发育高度,得出了北二采区各煤层工作面开采即不会受到上部砂砾含水层的影响,雁南煤矿铁路涵洞以西的胜利河冲击沟也不会受到北二采区的采动塌陷影响的结论。
2.
After analyzed the hydrogeological condition and water filling factors in the area,considered that the Jurassic bedded fissure and pore water is the direct water filling source,the Quaternary pore water,gob water and mine drainage are indirect water filling sources.
通过对该区水文地质条件和充水因素的分析,认为矿井直接充水水源是侏罗系层状裂隙孔隙水,间接充水水源是第四系孔隙水、老窿区积水和矿井排水。
3.
From the analysis of hydrogeological condition and water filling factors of both mines,predicted normal mine inflow and hazard in Luoyuan minefield through mine inflow comparison and analog method and groundwater dynamic formulae.
在分析井田充水因素的基础上,指出灰岩与煤岩层对口部位是突水发生的主要地段。
6)  water filling condition
充水条件
1.
The water filling conditions and water prevention-control countermeasures of underground mine in Sanxin company;
三鑫公司矿坑充水条件及综合防治水措施
补充资料:充水聚酯
分子式:
CAS号:

性质:又称含水不饱和聚酯树脂,水扩展聚酯,充水聚酯。不饱和聚酯树脂的水乳液。不燃烧,其他物理机械性能随含水量增加而下降。通常采用1,6-己二醇和无水顺丁烯二酸酐制成水溶性不饱和聚酯,加入水溶性单体、水、固化剂、促进剂和乳化剂制成水-油型(W/O)或油-水型(O/W)乳液,固化后使用。可作为合成木材、家具装饰材料,也可制成泡沫材料用于建筑隔热材料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条