说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 上流式厌氧流化床
1)  up flow anaerobic fluidized bed
上流式厌氧流化床
1.
Spheric Lignosulfonate Resin(LSAR) produced by sulfite process waste liquid dischanged in papermills was used as bio_microcarrier in laboratory_scale up flow anaerobic fluidized bed (UAFB) reactor.
以用造纸黑液制成的球形木质素树脂作为生物载体,在上流式厌氧流化床(UAFB)反应器装置中,进行了处理模拟高浓度酸化相出水的厌氧甲烷相流化床的运行实验。
2)  up-flow anaerobic sludge bed process
上流式厌氧污床
3)  anaerobic fluidized bed
厌氧流化床
1.
Two-phase anaerobic digestion process for treating high concentration sulfate-organic wastewater with jet-loop anaerobic fluidized bed reactor;
射流循环厌氧流化床两相厌氧处理高浓度硫酸盐有机废水
2.
Research of treating crythromycin wastewater in an anaerobic fluidized bed reactor;
厌氧流化床处理红霉素废水的研究
3.
Test on treating the toxicity of wastewater containing sulfur with anaerobic fluidized bed reactor.;
厌氧流化床反应器处理含硫废水毒性的实验
4)  AFB
厌氧流化床
1.
Study on Treatment of High Concentration Organic Wastewater in AFB Reactor at Normal Temperature;
常温厌氧流化床处理高浓度有机废水实验研究
5)  UASB
上流式厌氧污泥床
1.
Study on Treatment of Landfill Leachate by UASB Process;
上流式厌氧污泥床处理垃圾渗滤液的效果研究
2.
Study on Processing Paper-making Wastewater by UASB;
上流式厌氧污泥床处理造纸工业废水的研究
3.
The facility with UASB plus BSBR treatment of sorbic acid production wastewater had been established.
提出了上流式厌氧污泥床(UASB)、序批式间歇活性污泥法与和接触氧化法相结合(BSBR)的处理方法在山梨酸生产废水中的应用。
6)  upflow anaerobic sludge blanket
上流式厌氧污泥床
1.
Treatment of municipal landfill leachate by upflow anaerobic sludge blanket;
上流式厌氧污泥床处理城市垃圾渗沥液的试验研究
2.
The leachate from a Hong Kong landfill, containing 15 70 g/L of chemical oxygen demand (COD) and 2 26 g/L of ammonia nitrogen (NH 3-N), was first treated in a UASB (upflow anaerobic sludge blanket) reactor at 37 ℃.
2 6g/L)通过 UASB(上流式厌氧污泥床 )反应器 ,在 37℃ ,水力停留时间 6。
3.
Some problems to which attention should be paid in the start running of the upflow anaerobic sludge blanket reactor are discussed,such as temperature control,sludge stirring,influent distribution mode,influent concentration and anomaly handling and so on.
介绍了上流式厌氧污泥床处理甲醇废水工业装置启动初期应注意的几个问题,包括温度控制、污泥搅拌、进水方式、进水浓度及异常情况处理等,给出了具体的工艺参数。
补充资料:升流式厌氧污泥床法
分子式:
CAS号:

性质:系利用反应器底部的高浓度污泥床,对上升流废水进行厌氧生物处理的过程。其反应器底部是一个由活性高、沉降性能好的颗粒状厌氧污泥组成的污泥床(污泥浓度高达60~100g/L),反应器上部设有一个气、固、液三相分离器,分离器的下部是反应区,上部为沉淀区。污水在无氧条件下自下而上通过污泥床,有机物被厌氧微生物降解转化为甲烷和二氧化碳等气体,由于气体的搅动作用,在污泥床上部形成悬浮污泥层。气、水、泥经三相分离器分离,沼气被导出利用,水经沉淀后排出,泥回流至反应室。该反应器结构紧凑、处理效率高,容积负荷可达COD10~20KG/(m3·d),COD去除率可达75%~80%。该法已广泛应用于高浓度有机废水的处理,尤其是食品加工和屠宰废水的处理。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条