1) combustion wave rate
燃烧波速
1.
Based on the idea of local equilibrium,the filtration of the binary SHS systems were studied under the assumption of one-dimensional,lower combustion wave rate and steady state.
推导出燃烧温度和不同反应级数下燃烧波速的数学表达式，详细分析了有关参数对燃烧温度、燃烧波速的影响情况，得到了一些与实验一致的结果，同时还得到了一些新的预测。
2) velocity of combustion wave
燃烧波速率
3) burning rate
燃烧速度
1.
Using the global model for the oil tank fires developed by authors, the variation of the burning characteristics, such as the burning rate, the flame height, the flame pulsation frequency, and the mean flame temperature were obtained.
本文利用自行建立的油罐火灾燃烧特性通用模型,计算得到了燃烧速度、火焰高度,火焰跳动频率和平均温度等油罐燃烧特性的变化规律,并深入探讨了油品燃烧速度在油罐直径、风速、环境温度和油位等因素影响下的变化趋势。
2.
The influence of the ratio of composition Mg/KNO 3 on the burning rate,near-infrared radiation intensity and visible light intensity is determined by experiment in this paper.
通过实验确定了镁/硝酸钾药剂的配比对燃烧速度、近红外辐射强度和可见光强度的影响。
3.
7 m,the regularity of instantaneous burning rate and average burning rate were acquired.
燃烧速度是油罐火灾中决定火焰温度和辐射热的重要参量,其变化规律也决定着火灾中灭火预案及战术的制定。
4) burning rate
燃烧速率
1.
Experimental study of burning rate behaviour in confined and ventilated fire compartments;
在受限和通风防火分区内对燃烧速率特性的试验研究(英文)
2.
The effects of water bath on the burning rate of methanol pool fire
水浴保护对甲醇池火燃烧速率的影响
3.
A simple expression to caculate the burning rate of char particles in the furnace
炉膛内煤焦颗粒燃烧速率的简易求法
5) combustion rate
燃烧速率
1.
The experimental data show that the combustion rate and flame size in Lhasa are lower than those in Hefei.
实验结果表明,在相同尺寸油盘的燃烧速率、火焰宽度以及火焰体积下,拉萨的实验值比合肥小;相同燃烧速率油盘火对环境的热辐射通量,拉萨比合肥的实验值低,但是拉萨的火焰以及热烟气温度比合肥的高。
6) flashing combustion
闪速燃烧
1.
Formation mechanism of Fe_xSi particles in ferro-silicon nitride prepared via flashing combustion
闪速燃烧合成的Fe-Si_3N_4中Fe_xSi粒子的形成机理
2.
The phase and microstructure of Fe3Si-Si3N4 synthesized by FeSi(75) using flashing combustion process were researched.
利用SEM和EDS等手段对原料FeSi75闪速燃烧合成产物的相组成和显微结构进行了分析。
3.
The distribution status of Fe in the ferro silicon nitride (FeSi_(3)N_(4)) material synthesized by flashing combustion process was analyzed by means of fluorometric measurement, XRD, SEM and EDS.
用化学分析、XRD,SEM,EDS等检测手段,首次对闪速燃烧工艺制备的新型合成原料———氮化硅铁(FeSi3N4)中铁元素的存在状态进行了研究。
补充资料：沸腾床燃烧(见流化床燃烧)
沸腾床燃烧(见流化床燃烧)
boiling-bed combustion:see fluidized-bed combustion
沸腾床燃烧(boiling一bed eombustion)见流化床燃烧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条