1) Cr-target
铬靶
1.
The influence of manaufacture process on material properities of Cr-target from PM is studied,The favora ble condition for the manufaeture process is suggested.
对粉末冶金铬靶的制造工艺及其对铬靶材料性能的影响进行了详细的试验研究与讨论，获得优化的工艺组合。
2) target
[英]['tɑ:ɡɪt] [美]['tɑrgɪt]
靶
1.
Fabrication of Cu multi-step target used in EOS experiment
状态方程实验用铜多台阶靶制备工艺
2.
Influence of characteristic X-ray of impurity element on anonymous spectral lines excited by hydrogen gas discharge source bombarding targets
杂质元素特征X射线对氢气放电源打靶新谱线的影响
3.
The Ar~+Bombarding and Cleaning to the Target of Copper and Stainless Steel;
氩离子轰击清洗铜和不锈钢靶
3) Chromium(Ⅵ)
铬
1.
Simultaneous determination of chromium(Ⅵ) and manganese(Ⅶ) in steel by differential reaction rate kinetic spectrophotometry;
速差褪色动力学光度法同时测定钢中铬(Ⅵ)和锰(Ⅶ)
2.
Catalytic spectrophotometric determination of trace chromium(Ⅵ) based on the oxidation of hydrogen peroxide on ethyl violet;
过氧化氢氧化乙基紫催化光度法测定痕量铬(Ⅵ)
3.
Determination of Trace Chromium(Ⅵ) in High Purity Samarium Oxide by Extraction Spectrophotometry;
萃取光度法测定高纯氧化钐中的铬
4) Cr(Ⅵ)
铬
1.
Study on the Treatment of Wastewater Containing Cr(Ⅵ) with the Reductive Heavy Metal chelating Agent WY5;
新型还原性重金属捕集剂WY5的制备及其含铬废水处理效果
2.
DETERMINATION OF TRACE AMOUTS OF Cr(Ⅵ) BY ANTI CATALYTIC SPECTROPHOTOMETRY;
反催化分光光度法测定痕量铬(Ⅵ)的研究
3.
STUDIES OF MICROBIAL TREATMENT PROCESS FOR WASTEWATER WITH HIGH CONCENTRATION OF Cr(Ⅵ);
电镀超高浓度铬废水微生物治理工程的研究
5) Cr
铬
1.
Concentration of Chromium in Agricultural Soil and Crops and Their Healthy Risk;
湛江市农业土壤与作物铬含量及其健康风险
2.
Determination of Co,Cr,Fe,Mn,Mo,Ni,Ti in PTA by DUO-ICP-AES;
DUO-ICP-AES测定精对苯二甲酸中的钴、铬、铁、锰、钼、镍、钛
3.
Geogenic distribution and baseline concentrations of Cr in surficial soil of Guiyang, China;
贵阳表层土壤中铬的环境地球化学基线研究
6) chrome
[英][krəʊm] [美][krom]
铬
1.
Determination of chrome content in cashmere dyed with mordant black PV;
羊绒制品媒介黑PV染色后铬含量的测定
2.
Treatment of industrial wastewater containing chrome by techniques based on electrochemical principle;
基于电化学反应原理的含铬工业废水处理技术
3.
A study on determination of chrome in tannery waste leakage solution;
皮革废渣渗漏液中铬的测定
补充资料：靶扫描和靶重建
靶扫描和靶重建
影像学术语。CT检查中，对扫描野(SFOV)中某一兴趣区扫描时行较大矩阵重建的方式称靶扫描。在扫描及影像重建完成后，对显示野(DFOV)中某一兴趣区重新进行较大矩阵重建成像的方式称靶重建。前者是直接利用扫描野中兴趣区的较大量的原始数据进行影像重建，后者则是利用常规扫描中采集的原始数据进行兴趣区的影像重建。两种技术实现的基本前提都是一次扫描所获得的投影测量数据必须能够满足兴趣区影像重建矩阵所需的信息量。靶扫描在扫描前预先设定兴趣区，成像后不储存非兴趣区原始数据；靶重建则需储存层面扫描所获得的全部原始数据，占用较多的磁盘空间，但以后可在图像中任选兴趣区进行局部重建。两种技术在成像效果(空间分辨率，对比分辨率)上是一致的，这与单纯的局部图像放大(zoom)不同。后者没有增加兴趣区内像素数量，虽使影像扩大但分辨率并未提高，清晰度反有下降。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条