1) ideal geometric model
![点击朗读](/dictall/images/read.gif)
理想几何模型
1.
In this paper, based on the analyzes of helical characteristics, ideal geometric models of cutting edges and helical grooves of nose burr are developed.
通过分析刀刃的螺旋特性,建立了球头旋转锉刀刃及螺旋槽的理想几何模型。
2) geometrical-physical theory
![点击朗读](/dictall/images/read.gif)
几何物理模型
3) geometry model
![点击朗读](/dictall/images/read.gif)
几何模型
1.
Research on geometry models of NC machining of propeller blade surface;
![点击朗读](/dictall/images/read.gif)
螺旋桨叶片曲面数控加工几何模型研究
2.
Research on geometry models of NC machining of hyperbolic revolving surfaces;
![点击朗读](/dictall/images/read.gif)
数控加工双曲回转面的几何模型研究
3.
Part semantic relationship geometry model and gene coding;
![点击朗读](/dictall/images/read.gif)
零件语义关系几何模型及其基因编码
4) geometric models
![点击朗读](/dictall/images/read.gif)
几何模型
1.
A review of studies on the mechanical properties and microscopic geometric models of three dimensional braided composites is given in this paper.
对三维编织复合材料的细观结构几何模型和力学性能的研究进展进行了综述。
2.
A kind of establisment method of geometric models for prestressed concrete continuous girder bridge is given, and builds the box-girder constructional geometricmodels.
针对预应力混凝土连续梁桥,提出了一种几何模型的建立方法;建立了箱形梁构造的几何模型。
5) geometrical model
![点击朗读](/dictall/images/read.gif)
几何模型
1.
Research of dynamics characteristic of high speed rotors by using dynamic equation and geometrical model;
基于动力学方程及几何模型的高速转子动力学特性
2.
A unit cell geometrical model for 4-step 3D 4-directional rectangular braided composites is proposed.
提出了四步法三维四向矩形编织复合材料的单胞几何模型,该模型考虑了空间纤维束的相互扭结和挤压而造成的纤维束弯曲和截面形状变化。
3.
The variation of ring shape in cold rolling pro ce ss was analysed and the geometrical model of ring profile was developed.
分析了环件冷轧中的几何形状变化规律,提出了冷轧中环件轮廓形状的几何模型。
6) geometric model
![点击朗读](/dictall/images/read.gif)
几何模型
1.
Hairiness analysis of sirospun and ringspun based on geometric models;
![点击朗读](/dictall/images/read.gif)
基于几何模型的赛络纱与环锭纱毛羽分析
2.
Research of Geometric Model Construction for Virtual Surgery of Cardiac Intervention;
![点击朗读](/dictall/images/read.gif)
虚拟心脏介入手术的几何模型构建技术研究
3.
Method of constructing geometric model of open hole wall
![点击朗读](/dictall/images/read.gif)
一种裸眼井壁几何模型的构造方法
补充资料:理想混合模型
分子式:
CAS号:
性质:或称理想混合模型。是化工过程设备模拟中常用的模型。全混流是理想流动的一种。其特征是在连续流动过程中,无论轴向或是径向都是达到完全混合,以致物系参数均一。全混流流是返混程度最在的一种流动。该模型的基本假定是设备内物料的浓度均一,且等于设备出口处的浓度。模型方程为:V(dc/dt)=v(c0-c)c及c0分别为设备内及进口处示踪物的浓度,t为时间,v为物料的体积流量,V为设备的工作体积。如将该模型方程用于连续流动设备,c则代表参与过程的组分浓度,同时还应根据过程的性质在模型方程中加入相应的项,如反应项、传质项等。
CAS号:
性质:或称理想混合模型。是化工过程设备模拟中常用的模型。全混流是理想流动的一种。其特征是在连续流动过程中,无论轴向或是径向都是达到完全混合,以致物系参数均一。全混流流是返混程度最在的一种流动。该模型的基本假定是设备内物料的浓度均一,且等于设备出口处的浓度。模型方程为:V(dc/dt)=v(c0-c)c及c0分别为设备内及进口处示踪物的浓度,t为时间,v为物料的体积流量,V为设备的工作体积。如将该模型方程用于连续流动设备,c则代表参与过程的组分浓度,同时还应根据过程的性质在模型方程中加入相应的项,如反应项、传质项等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条