1) rapid solidification / powder metallurgy process
快速凝固/粉末冶金法
2) rapid solidification/powder metallurgy
快速凝固/粉末冶金
1.
AZ91 magnesium alloy bars were fabricated by rapid solidification/powder metallurgy(RS/PM) process.
采用快速凝固/粉末冶金法制备AZ91镁合金,研究了不同挤压比对AZ91镁合金室温力学性能及显微组织结构的影响。
3) rapidly solidified powder metallurgy
快速凝固/粉末冶金
1.
6%Si(FMS0918) alloy and FMS0918/5%(Zn-30%Al) composite were produced by rapidly solidified powder metallurgy(RS P/M) process.
采用快速凝固/粉末冶金法(RS P/M)制备Al-9。
2.
Al-Fe-Mo-Si/5(Zn-30Al)damping aluminium alloy(LJ5A) was produced by rapidly solidified powder metallurgy(RS P/M) process.
采用快速凝固/粉末冶金(RS P/M)工艺制备了Al-Fe-Mo-Si/5(Zn-30Al)阻尼铝合金(LJ5A),详细研究坯料形状、单向压扁变形、交叉压扁变形对LJ5A挤压棒材室温拉伸性能的影响。
4) Powder Metallurgical Method
粉末冶金法
1.
The preparation of foamed Fe with high melting point has been studied in this paper by the powder metallurgical method.
本文采用粉末冶金法，对高熔点泡沫铁的制备进行了研究，成功的制备了孔隙率范围在40-67%、孔径在0。
5) powder metallurgy technique
粉末冶金法
1.
Fly ash strengthened aluminium-matrix composite was prepared using powder metallurgy technique.
采用粉末冶金法制备粉煤灰增强铝基复合材料。
2.
The powder metallurgy technique was used to prepare fly-ash-reinforced Al-Si alloy composites, and the microstructure and mechanical properties were analyzed.
以浓硫酸处理过的粉煤灰颗粒为增强体,Al-20%Si合金粉为基体,采用粉末冶金法制得粉煤灰颗粒增强铝基复合材料,并对复合材料的微观形貌及力学性能进行了分析。
6) powder metallurgy method
粉末冶金法
1.
Development course and kinetics mechanism of foam body expansion were investigated during preparing foam aluminum by powder metallurgy method.
采用粉末冶金法制备泡沫铝材料,对发泡过程中泡沫体膨胀的演变过程及动力学机制进行了研究。
2.
The process of preparation foam aluminum by powder metallurgy method was studied.
对采用粉末冶金法制备泡沫铝材料进行研究。
3.
The uses and application foreground and the current status of domestic and foreign research onfoam aluminum material are introduced in this paper,focussing on expounding basic principle and the process flow,andthe most advantage and disadvantage of preparing polymer foams materials by powder metallurgy method.
介绍了多孔金属材料的用途和应用前景、国内外的研究现状,重点阐述了采用粉末冶金法制备多孔金属材料的基本原理、工艺流程及其优缺点。
补充资料：胶乳快速凝固
分子式：
CAS号：
性质： 为缩短胶乳凝固时间，在加有保存剂和稳定剂的鲜胶乳中，加入少量的促凝剂椰子油皂，在凝固剂中加入少量的促凝剂氯化钙，则可促使胶乳尽快凝固成结实凝块。提高促凝剂用量或使用高效的表面活性剂可进一步缩短凝固时间。快速凝固是实现凝固、压片连续化生产、提高制胶效率的必要条件。
CAS号：
性质： 为缩短胶乳凝固时间，在加有保存剂和稳定剂的鲜胶乳中，加入少量的促凝剂椰子油皂，在凝固剂中加入少量的促凝剂氯化钙，则可促使胶乳尽快凝固成结实凝块。提高促凝剂用量或使用高效的表面活性剂可进一步缩短凝固时间。快速凝固是实现凝固、压片连续化生产、提高制胶效率的必要条件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条