1) non-mechanism model
非机理模型
2) non-mechanism water quality model
非机理性水质模型
1.
With the development of modern stochastic mathmatics and statistical methods,the non-mechanism water quality models have been widely applied in water environment.
随着现代随机数学和统计学的发展,非机理性水质模型得到了广泛的应用;非机理性水质模型虽然是一种黑箱式方法,但因其针对某一特定的物质系统,通过数学统计或其他数学方法建立模型,模拟预测也得到了较好的效果。
3) mechanism model
机理模型
1.
Application of catalytic reforming mechanism model in production planning;
重整机理模型在生产计划中的应用研究
2.
Study on parameter optimization using genetic algorithm for mechanism model of thermal equipment;
基于遗传算法的热力设备机理模型参数优化方法研究
3.
Dynamic characteristics analysis of proton exchange membrane fuel cell based on mechanism model
基于机理模型的质子交换膜燃料电池动态特性分析
4) mechanistic model
机理模型
1.
A cross-section direction two-dimensional mechanistic model of the Siemens-Westinghouse Power Corporation’s (SWPCs) cathode-supported tubular solid oxide fuel cell(SOFC) was developed.
针对Siemens-Westinghouse公司阴极支撑型(AES)管式固体氧化物燃料电池,耦合电极内部离子传导、电子传导、气体扩散、热量传递及电化学反应过程,建立了全面考虑活化极化、欧姆极化与浓差极化损失的管式SOFC横截面方向二维微观机理模型。
2.
Using the experimental data of flow boiling heat transfer in narrow annular channels as the initial conditions, the fourth-order Runge-Kutta method was used to calculate void fraction mechanistic model of subcooled boiling.
以环形狭缝通道中流动沸腾传热的实验数据为初始条件,运用四阶龙格-库塔法对过冷沸腾空泡率的机理模型进行了数值求解,并对计算结果进行了分析。
5) mechanism modeling
机理模型
1.
The fuzzy control technique was applied to the dynamic control process of reheating furnace temperature with the data input from the mechanism modeling to track the change in the temperature of all blooms in the furnace, thus building a fuzzy controller with feedforward modification.
以加热炉动态过程全炉钢坯温度跟踪计算机理模型获得控制输入信息,将模糊控制方法应用于炉温的动态控制,构造了带有前馈修正的模糊控制器。
2.
According to so much field experiment and research of theory,combining to the craft feature and equipment characteristics of the UCM,after the transfer coefficient of bending force to rolling force and bending force to tension aimed at the minimal fluctuation of shape of strip were acquired on the base of mechanism modeling, one systemic bending online quick-adjusting technique was formed.
经过大量的现场试验与理论研究,充分结合UCM机型冷轧机组的设备与工艺特点,在基于机理模型、以产品板形波动最小为目标、分别求出弯辊力对轧制力的传递系数、弯辊力对张力的传递系数的基础上,将非线性问题进行局部线性化处理,根据现场实际轧制力与张力的波动值给出相应的弯辊力调整量,形成了一套完整的适合于UCM机型冷轧机组、基于机理模型的弯辊在线快速调整技术,应用于实际生产后取得了良好的使用效果。
3.
Analysis on mechanism modeling for biomass gasification for power;
最常用的气化过程建模方法是建立机理模型,文章在重点分析了气化过程机理的基础上,把气化模型划分为平衡模型和动态模型两大类,并比较了各模型的优缺点。
6) mechanical model
机理模型
1.
Investigation on the application of FCC mechanical model;
催化裂化机理模型的应用开发
2.
By means of the method of piecewise centralizing the distributed system parameters, a dynamic mechanical model of the tube-and-shell heat exchangers was proposed.
利用分布参数分段集中化的思想,建立了多管单壳换热器动态机理模型,以此为基础,编程建立了多管单壳换热器两个基本仿真模块,用这两个基本仿真模块可以组合得到所有类型的多管多壳换热器的仿真模块,即而组成多管多壳换热器的仿真模型库,利用该模型库可以根据换热网络的结构方便地搭建换热网络的仿真系统。
补充资料：非想非非想处天
1.佛教语。即三界中无色界第四天。此天没有欲望与物质﹐仅有微妙的思想。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条