1) in situ chelate
原位络合法
3) in-situ polymerization
原位聚合法
1.
Study on the preparation of polyimide /ZrW_2O_8 hybrid films by in-situ polymerization;
原位聚合法制备聚酰亚胺/钨酸锆杂化薄膜的研究
2.
In order to improve the properties of PS,Al2O3 powder was prepared by precipitation method,and PS-Al2O3 hybrid material was fabricated by in-situ polymerization method with styrene(ST) and AlCl3 as raw materials.
为了对聚苯乙烯进行改性,以苯乙烯(ST)和AlCl3为主要原料,采用化学沉淀法制备了Al2O3粉末,用原位聚合法制备了聚苯乙烯-Al2O3杂化材料,采用XRDI、R、TG-DTA、SEM、索氏抽提等方法对杂化材料进行了分析,结果表明,在杂化材料中Al2O3是以非晶态的形式存在的,聚苯乙烯(PS)通过丙烯酸(AA)作为交联剂接枝到Al2O3上,Al2O3粒子以10 nm左右的粒径分布在杂化材料中。
3.
The preparation of microcapsules of bio-pesticide rotenone by means of in-situ polymerization,with melamine formaldehyde resin(MF) as the shell material, is discussed in this paper.
采用三聚氰胺甲醛树脂(MF)作为囊壁,用原位聚合法对生物农药鱼藤酮进行包囊,制备微胶囊制剂。
4) in situ polymerization
原位聚合法
1.
Preparation of Microcapsules Containing Initiator for Anaerobic Adhesive by in situ polymerization;
原位聚合法制备厌氧胶固化引发剂微胶囊
2.
Preparation of red encapsulated electrophoretic ink by in situ polymerization;
原位聚合法制备红色电子墨水微胶囊
3.
A composite of polyaniline(PANI) containing antimony doped tin oxide nanoparticles(nano-ATO) was prepared by in situ polymerization method.
用原位聚合法,以十二烷基苯磺酸(DBSA)/HC l混酸为掺杂剂,过硫酸胺(APS)为氧化剂,制备了聚苯胺/掺锑二氧化锡(ATO)导电复合材料。
6) in-situ polymerization process
原位聚合法
1.
Urea-formaldehyde microcapsules were prepared by in-situ polymerization process and L_9(3~4) orthogonal design of experiment.
用原位聚合法设计L9(34)正交实验制备脲醛树脂微胶囊,讨论了助剂用量和乳化速度对微胶囊水悬浮液稳定性的影响,得到了制备稳定性较好的脲醛树脂微胶囊的工艺参数。
2.
Melamine-urea-formaldehyde-chlorocyclophosphazene microcapsule flame retardant was made by in-situ polymerization process using melamine, urea and formaldehyde as raw materials.
以三聚氰胺、尿素和甲醛为原料,采用原位聚合法,制备了囊心为环状氯化磷腈、囊壁为三聚氰胺尿素甲醛树脂的微胶囊阻燃剂。
3.
Melamine-urea-formaldehyde-chlorocyclo-phosphazene microcapsule flame retardant was prepared by in-situ polymerization process using melamine, urea and formaldehyde as raw material.
以三聚氰胺、尿素和甲醛为原料,采用原位聚合法,制备了囊心为环状氯化磷腈、囊壁为三聚氰胺-尿素-甲醛树脂的微胶囊阻燃剂。
补充资料：分解络合法
分子式：
CAS号：
性质：又称分解络合法，通过加热分解，冷却络合的操作实现回流的方法。氨基甲酸酯-CO2体系富集13C时，加热底回流器中的氨基甲酸酯。[R2NCOO]-+[H2NR2]2R2NH+CO2↑使其分解成胺和CO2(R为正丁基)，进行底回流。室温下用泵打入主塔上的R2NH2吸收交换塔顶部出来的CO2，2R2NH+CO2[R2NCOO]-+[H2NR2]又重新生成氨基甲酸酯，回流入塔，进行顶回流，实现同位素多级交换过程。
CAS号：
性质：又称分解络合法，通过加热分解，冷却络合的操作实现回流的方法。氨基甲酸酯-CO2体系富集13C时，加热底回流器中的氨基甲酸酯。[R2NCOO]-+[H2NR2]2R2NH+CO2↑使其分解成胺和CO2(R为正丁基)，进行底回流。室温下用泵打入主塔上的R2NH2吸收交换塔顶部出来的CO2，2R2NH+CO2[R2NCOO]-+[H2NR2]又重新生成氨基甲酸酯，回流入塔，进行顶回流，实现同位素多级交换过程。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条