1) dressing
[英]['dresɪŋ] [美]['drɛsɪŋ]
修锐
1.
A mist-jetting electrical discharge truing and dressing technology was proposed.
利用电火花成形机床进行雾气中电火花修锐青铜结合剂金刚石砂轮的实验,研究了修整过程中的不同放电参数对修整效率的影响。
2.
Experiments on ablation and dressing of resin-bonded CBN grinding wheels by single laser pulse and by pulse laser respectively have been carried out to analyze dressing mechanism and disciplines of dressing effects influenced by laser and technology parameters.
本文从试验和数值模拟两方面对声光调Q Nd：YAG脉冲激光径向修锐树脂结合剂CBN砂轮进行研究。
3.
In this paper,three characteristic parameters,namely,the valid grit protrusion height,the grit protrusion angle,and the grit protrusion homomorphy,are proposed to correctly evaluate the microscopic protrusion topography of grits after the dressing of the diamond grinding wheel.
针对金刚石砂轮修锐后磨粒微观出刃形貌很难评价的问题,建立了有效磨粒出刃高度、磨粒出刃角和磨粒出刃同形度的特征参数模式。
2) sharpening
[英]['ʃɑ:pən] [美]['ʃɑrpṇ]
修锐
1.
The truing and sharpening methods of CBN wheels are summarized.
综合评述了CBN砂轮的整形和修锐方法 ,分析了各种方法的特点和应用。
2.
Experiments of mechnical grinding sharpening and sand blasting sharpening were also conducted and their effect was compared.
同时,分析比较了机械修锐和喷砂修锐的效果。
3) laser dressing
激光修锐
1.
Experimental research on laser dressing of bronze bond diamond grinding wheel;
青铜结合剂金刚石砂轮激光修锐试验研究
2.
The methods to dress diamond grinding wheel using assistant side blowing and to measure grinding force with simplifying process were presented,in which grinding force,grinding force ratio and specific grinding energy were computed and the comparison between the results before and after laser dressing verified the effectiveness of laser dressing from different aspects.
介绍了辅助侧向吹气法金属结合剂金刚石砂轮的激光修锐试验和简化测力评价方法,计算比较了修锐前后砂轮磨削力、磨削力比和比磨削能,从不同角度说明了辅助侧向吹气法对激光修锐金属结合剂金刚石砂轮的有效性。
3.
Experimental studies on laser dressing of resin - bonded CBN grinding wheels by an acoustic - optic Q - switched Nd: YAG pulsed laser in wheels radial orientation were earned out.
研究了单脉冲激光辐照下,平均功率、脉冲频率和离焦量等参数对烧蚀凹坑深度的影响,由此可方便获得合适的激光修锐参数;分析了声光调Q YAG脉冲激光修锐树脂CBN砂轮的选择性去除机理。
5) electro-contact discharge dressing
接触放电修锐
1.
Therefore, we developed a new dressing method, namely electro-contact discharge dressing.
针对微细金刚石磨粒很难从金属结合剂砂轮的胎体中出刃的问题 ,开发出一种新修锐方法 -接触放电修锐。
补充资料：三修──胜三修
【三修──胜三修】
﹝出涅槃经﹞
谓菩萨依佛胜教而修，破于声闻劣修，故名胜三修。
［一、常修］，常即不迁不变之谓也。盖菩萨了知法身之体，本来常住，无灭无生，以破声闻之人，不应于诸法中执为无常，是名常修。
［二、乐修］，乐即安隐寂灭之谓也。盖菩萨了知诸法之中，而有涅槃寂灭之乐，以破声闻之人，不应于诸法中执之为苦，是名乐修。（梵语涅槃，华言灭度。）
［三、我修］，我即自在无碍之谓也。盖菩萨了知无我法中而有真我，得大自在，无有障碍，以破声闻之人，不应于诸法中执为无我、无我所，是名我修。（我所者，谓五阴之身及资生等物也。）
﹝出涅槃经﹞
谓菩萨依佛胜教而修，破于声闻劣修，故名胜三修。
［一、常修］，常即不迁不变之谓也。盖菩萨了知法身之体，本来常住，无灭无生，以破声闻之人，不应于诸法中执为无常，是名常修。
［二、乐修］，乐即安隐寂灭之谓也。盖菩萨了知诸法之中，而有涅槃寂灭之乐，以破声闻之人，不应于诸法中执之为苦，是名乐修。（梵语涅槃，华言灭度。）
［三、我修］，我即自在无碍之谓也。盖菩萨了知无我法中而有真我，得大自在，无有障碍，以破声闻之人，不应于诸法中执为无我、无我所，是名我修。（我所者，谓五阴之身及资生等物也。）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条