说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 湿热劣化
1)  moisture heat deterioration
湿热劣化
2)  anti-thermal degradation
抗热劣化
1.
The thermal degradation results indicated that the γ-Al2O3 coating film obviously enhanced the anti-thermal degradation property.
热劣化结果表明,BaAl12O19:Mn2+绿粉经Al2O3包膜处理后,抗热劣化性能得到了明显改善。
3)  thermal degradation
热劣化
1.
Mechanism of chromaticity y-value shift during thermal degradation of BaMgAl_(10)O_(17):Eu~(2+) phosphor;
BaMgAl_(10)O_(17):Eu~(2+)蓝色荧光粉热劣化中色坐标y值漂移
2.
For BAM,a serious thermal degradation takes place after annealing in air.
提出了BAM的热劣化模型 ,该模型能较好地说明热处理气氛中含氧量同BAM热劣化程度的关系。
3.
In additional, the thermal degradation of BAM phosphor and the effect of organic addhesive on secondary properties were discussed.
系统研究了烧结温度、保温时间以及粘结剂的种类对荧光粉热劣化程度的影响。
4)  Accelerating Thermal Aging
加速热劣化
5)  hygrothermal aging
湿热老化
1.
By studying and summing up the common failure physical models and combining with the quantum mechanics theory on the relationship between the electronic equipment aging reaction rate and tempreture-humidity,a hygrothermal aging life model for solid propellant storage and usage is established with the propellant mechanical properties as the research object.
通过对常用失效物理模型的分析和总结,结合量子力学理论关于电子产品老化反应速率与环境温、湿度的关系,以推进剂力学性能参数为研究对象,建立了固体推进剂贮存使用寿命的湿热老化模型,并通过试验数据拟合得到具体的经验公式。
2.
The hygrothermal aging behavior of the CF /epoxy NOL rings in distilled water at 35℃, 55℃, 65℃and 75℃was analyzed in terms of the absorption characteristics, static and dynamic mechanical properties.
本论文旨在碳纤维缠绕复合材料压力容器的加速湿热老化方案的设计以及储存寿命预测提供基础数据,并对其寿命预测进行初步研究。
3.
In this paper, the standard accelerated hygrothermal aging spectrum for military aircraft composite structures is given based on the domestic climatic environment and the developing aircraft properties, and the aging effects for our composite material system are systematically studied, and the conclusion for guiding and modifying the structure design are given.
本文根据我国气候环境和在研型号性能,编制了适用于军机复合材料结构的标准加速湿热老化谱,并系统研究了国产材料体系的老化效应,得出了指导和修改结构设计的有益结论。
6)  damp & heat aging
湿热老化
1.
Chlorosulfonated polyethylene (CSPE) bang is ed as moistureproof layer of which niternal wall of industrial bang tower is Under damp & heat aging environment.
氮磷化聚乙烯(CSPE)涂料适于用作具有湿热老化作用环境的工业冷却塔塔身内壁的防潮涂层。
补充资料:驳驳劣劣
1.莽戆。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条