1) interfere type
干涉型式
2) interference model
干涉模型
1.
Therefore,a stress-strength interference model for the reliability calculation of rock mass under two-end truncated probability distribution was proposed with the help of distribution theories.
为此,借助理论分布,提出了两端截尾概率分布下围岩可靠度计算的应力—强度干涉模型。
2.
Through analyzing the interference model of stress-intensity,aiming at the characteristic of special electromagnetism of security components,the release reliability of special electromagnetism of security components was brought forward.
通过对应力—强度干涉模型的分析,针对安全部件专用电磁铁的特性,提出了安全部件专用电磁铁的释放可靠性理论。
3.
In the condition of assuming that stress and intensity obey normal distribution,the basic method of reliability design,stress-intensity interference model is discussed.
在假设应力和强度服从正态分布的条件下,讨论了零件可靠性设计的基本方法———应力-强度干涉模型及相关计算公式。
3) Interferometric SAR (InSAR)
干涉式SAR
4) Mach-zehnder interferometric FOG (MZ-IFOG)
MZ型干涉式光纤陀螺仪
5) fiber optic MZ interferometer
MZ型干涉式光纤传感器
6) non-interference model
非干涉仪型
补充资料：55°圆锥管螺纹型式和尺寸
| 螺纹代号 | 基本尺寸 英 寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 圆弧尺寸 r | 底孔尺寸 mm |
| R 1/16 | 1/16＂ | 7.723 | 0.907 | 28 | 7.142 | 6.561 | 0.581 | 0.125 | 6.4 |
| R 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 0.125 | 8.4 |
| R 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 0.184 | 11.2 |
| R 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.950 | 0.856 | 0.184 | 14.75 |
| R 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 0.249 | 18.25 |
| R 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 0.249 | 23.75 |
| R 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 0.317 | 30 |
| R 1 1/4 | 1 1/4＂ | 41.910 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 0.317 | 38.5 |
| R 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 0.317 | 44.5 |
| R 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 0.317 | 56 |
| R 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 0.317 | 71 |
| R 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 0.317 | 85.5 |
| R 4 | 4＂ | 113.030 | 2.309 | 11 | 111.551 | 110.072 | 1.479 | 0.317 | 110.5 |
| R 5 | 5＂ | 138.430 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 0.317 | 136 |
| R 6 | 6＂ | 163.830 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 0.317 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条