1) residual turbidity
残余浊度
1.
The Research on the Best Coagulative GT Value of High Turbidity Water(Part Ⅱ )- Taking the residual turbidity of clarified water as a standard;
高浊度水混凝最优GT值研究(二)─—以澄清水层残余浊度为标准
2.
By means of the method of stalic tests of settling this paper takes the residual turbidity of clarified water as an index to study the best coagula-tive GT value of common mine water, Which' s turbidity is equal to or less than 400 degrees.
以聚合氯化铝(PAC)为混凝剂,通过静水沉淀实验,以澄清水层的残余浊度为指标,对原水浊度小于等于400度的常规矿井水的混凝最优GT值进行了研究。
3.
By means of the method of static tests of precipitation this paper takes the residual turbidity of clarified water as a standard to study experimentally and theoretically the best coagulative GT value of low turbid water, which s concentration is equal to or more than 1kg/m3.
本文以聚丙烯酰胺为混凝剂，通过静水沉淀实验，以澄清水层残余浊度为指标，对原水浓度(1kg/m3的低浊度水混凝最优GT值的求取进行实验和理论研究，取得了一些新成果。
2) residual turbidity
剩余浊度
3) Residual thickness
残余厚度
4) Residual strength
残余强度
1.
Study on the determination of residual strength for expansive soil;
确定膨胀土残余强度的试验研究
2.
The result shows that the installation of bolts can effectively enhance the peak and residual strength of the bolted rock body and that bolts strengthen the strength of residual of the rock body more than they do the strength of its peak Moreover,with the increase of t.
结果表明 :安设锚杆可以有效提高锚固岩体的峰值强度和残余强度 ,且锚杆对岩体残余强度的强化程度大子对峰值强度的强化程度。
3.
By the simulation test, it is proved that the function of rock bolt is to raise the residual strength of broken surrounding rock around roadway, and the broken surrounding rock is made into a reinforced arch.
通过模拟试验证明了锚固力的作用在于提高巷道周边破裂围岩的残余强度，并使锚固体形成组合拱。
5) Scallop-Height
残余高度
6) residual concentration
残余浓度
1.
Based on this, we developed stick corrosion inhbitor CT2 - 14, gas - liquid phase corrision inhibitor CT2 -15, and the analysis technology of corrosion inhibitors residual concentration.
针对新的腐蚀问题研究出CT2 - 14棒状缓蚀剂、CT2 - 15气液两相缓蚀剂等新的缓蚀剂品种和缓蚀剂残余浓度分析等配套技术 ,并在川东大天池气田、川中磨溪气田、川西北中坝气田及集输管线内进行了应用 ,在此基础上总结出了各区块的防腐方案。
2.
The article introduces a kind of quantitative analysis method, which is used in monitoring the residual concentration of corrosion inhibitor in gasfield brines.
介绍了一种用于监测油气井采输工艺常用缓蚀剂在气田产出水中残余浓度的定量分析方法。
补充资料：光电浊度计
分子式：
CAS号：
性质：测定浊度的仪器。光线通过溶液时，受溶液中杂质或悬浮物的影响，部分光线被散射，使溶液呈现出浑浊状态，其浑浊的程度称为浊度。这是清漆或清油的一个质量指标。将受试的清油或清漆置于试管中，插入光电浊度计内，仪器发射的光受试样中杂质或悬浮物的影响，产生散射光，经反射罩反射，投影在硫化镉光敏电阻上，散射光的强弱，在仪表上显示出来。浊度以扩散光系数与总的透光系数之比表示之。
CAS号：
性质：测定浊度的仪器。光线通过溶液时，受溶液中杂质或悬浮物的影响，部分光线被散射，使溶液呈现出浑浊状态，其浑浊的程度称为浊度。这是清漆或清油的一个质量指标。将受试的清油或清漆置于试管中，插入光电浊度计内，仪器发射的光受试样中杂质或悬浮物的影响，产生散射光，经反射罩反射，投影在硫化镉光敏电阻上，散射光的强弱，在仪表上显示出来。浊度以扩散光系数与总的透光系数之比表示之。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条