1) horizontal thickness
横向厚度
1.
Inquirng into the relation of shape and distribution of horizontal thickness;
板带板形与横向厚度分布关系探讨
2) Transversal Thickness Precision
横向厚度精度
1.
An Improvement on Transversal Thickness Precision of Silicon-Steel Sheet Rolled by ZR3~# Sendzimer Cold Strip Mill;
ZR3~#轧机轧制硅钢片横向厚度精度的改善
2.
Research of Sendzimir Mill transversal thickness precision control improvement;
提高森吉米尔轧机横向厚度精度控制的研究
3) cross caliper control
横向厚度控制
4) profile thickness
全幅横向厚度
5) transverse wall thickness
横向壁厚
1.
It was found that the transverse wall thickness distribution is nonuniform and that is the cause of hexagonal bore formation.
通过研究各机架出口断面不同点的壁厚变化,得出减径后钢管横向壁厚分布不均,探讨了内六方缺陷产生的原因。
2.
The transverse wall thickness of stretch-reduced tube product is unevenness to result in the formation of bore polygon by researching its distribution.
根据张力减径机的孔型特点,建立了全系统三维弹塑性有限元分析模型,对18机架张力减径过程进行数值模拟,通过研究横向壁厚分布,得出减径钢管产品沿圆周方向的壁厚分布不均,产生内多边形缺陷,并将模拟结果与实测结果进行对比,验证了所建立模型的准确性。
6) thickness distribution
横向厚差
1.
In this paper,the reation between sheet shape and thickness distribution in width is set up including the influence of out tension based on measured tensions in works The influence of out tension to sheet shape is solved quantitatively It is important to improve the calculated accuracy of shape contro
以现场实测前张力分布为依据，考虑了前张力对板形的影响，建立板形与横向厚差的关系。
2.
In this paper, the relation between sheet -shape and thickness distribution in width is set up include the influence of out-tension based on measured tensions in works, The influence of out-tension to sheet shape is solved quantitatively.
本文以现场实测前张力分布为依据，考虑了前张力对板形的影响，建立起板形与横向厚差的关系。
补充资料：板带厚度测量
板带厚度测量
thickness measurement of plate and strip
bondai houdu eeliang板带厚度测量(thiekness measurement ofpfate and strip)指板带厚度尺寸的在线实时测量。这是提高成品率，保证板带材产品质量的重要措施，是实现生产过程自动化不可缺少的重要环节。(见厚度自动挂制) 板带厚度的在线测量可分为接触式测量和非接触式测量两类。接触式测量按工作原理分为电感式、差动变压器式、角位移式、磁栅式等。非接触式测量按工作原理分为射线式、微波式、激光式、气动式、涡流式等。在生产过程中，选用哪种测量方式，取决于板带的材质和生产过程工艺所提出的技术要求。非接触式测量得到广泛采用。 中国在2。世纪50年代开始对测厚仪进行了研究，现在已有了各种类型的测厚仪，对轧制生产线的自动控制起了很大的促进作用。各种类型测厚方法的仪器、应用范围和产地如表所列。 各种测厚仪器的性能、特点和应用扭李 (李由婉)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条