1) SPEKK
磺化聚醚酮酮
1.
STUDY ON THERMAL STABILITY OF PEKK AND SPEKK;
聚醚酮酮和磺化聚醚酮酮的热稳定性研究
2) sulfonated polyaryletherketoneketone
磺化聚芳醚酮酮
1.
The sulfonated polyaryletherketoneketone(S PEKK) was synthesized from cross linked polyaryletherketoneketone with 20% fuming sulfuric acid, and then it was used as catalyst in esterification of fumaric acid and methyl alcohol.
以交联的聚芳醚酮酮和发烟硫酸 (含 SO3 2 0 % )合成了磺化聚芳醚酮酮树脂 ,并用于催化富马酸和甲醇的酯化反应。
2.
The sulfonated polyaryletherketoneketone(S-PKKK) was synthesized from cross-linking polyaryletherketoneketone with 20% fuming sulphuric acid, and then it was use as catalyst in esterification of phenylacetic acid and β-phenethyl alcohol.
以交联的聚芳醚酮酮和发烟硫酸(含SO320%)合成了磺化聚芳醚酮酮树脂,并用于苯乙酸和β-苯乙醇的催化酯化。
3.
The sulfonated polyaryletherketoneketone was synthesized by reaction of crosslinking polyaryletherketoneketone with 20% fuming sulphuric acid as sulfonating agent and used to catalyze the reaction of malic anhydride with 2ethylhexyl alcohol.
以交联的聚芳醚酮酮和 2 0 %发烟硫酸合成了磺化聚芳醚酮酮树脂 ,并用于顺丁烯二酸酐和 2乙基己醇的催化酯化。
3) sulfonated poly(ether ether ketone)
磺化聚醚醚酮
1.
Preparation of phosphotungstic acid/silica/sulfonated poly(ether ether ketone) composite membranes and its characterization and properties;
磷钨酸/二氧化硅/磺化聚醚醚酮复合膜的制备、表征与性能
2.
Preparation and characterization of poly(ether sulfone)/sulfonated poly(ether ether ketone) blend membranes;
聚醚砜/磺化聚醚醚酮共混膜的制备和性能
3.
Preparation, structure and performance of the sulfonated poly(ether ether ketone)/ α -zirconium phosphate composite membranes;
磺化聚醚醚酮/α-ZrP复合膜的制备、结构与性能
4) SPEEK
磺化聚醚醚酮
1.
Preliminary Study of SPEEK Membranes for Direct Methanol Fuel Cells Application;
直接甲醇燃料电池用磺化聚醚醚酮膜初探
2.
In this work, the conductivity and the methanol diffusion resistance of SPEEK-PEM were evaluated with the improved two-poles AC measurement device and the diffusion cell with the refractometer which were designed by us selves, respectively.
采用自行建立的改进型交流两电极法测量磺化聚醚醚酮(SPEEK)材料PEM的电导率,采用扩散池和折光仪测试PEM甲醇透过性能。
3.
The sulfonated polyether ether ketone(sPEEK)/zirconium phosphate composite proton exchange membranes were prepared by a sol-gel process in which zirconium phosphates were formed in-situ in the organic solution.
采用溶胶?凝胶法原位生成磷酸锆,制备磺化聚醚醚酮/磷酸锆复合质子交换膜。
5) sulfonated polyetheretherketone
磺化聚醚醚酮
1.
Study on conductivity and mass transfer of blend membranesof sulfonated polyetheretherketone and polysulfone;
磺化聚醚醚酮与聚砜共混膜导电与传质特性研究
2.
Sulfonated polyetheretherketone(SPEEK) with various degree of sulfonation(DS) was prepared by sulfonation of commercial Victrex~(D○R) PEEK.
通过磺化反应制备了磺化聚醚醚酮,1H-NMR测试表明其磺化度分别为0。
6) sulfonated polyetheretherketone(sPEEK)
磺化聚醚醚酮
1.
On the basis of the retrospect on the development of the proton exchange membranes(PEM) made of sulfonated polyetheretherketone(SPEEK) used in the direct methanol fuel cell(DMF),the study progresses of the synthesis method of SPEEK,the sulfonation of polyetheretherketone(PEEK) for making SPEEK and the preparation technique of SPEEK proton exchange membranes are reviewed respectively.
在回顾近年来直接甲醇燃料电池用磺化聚醚醚酮(SPEEK)质子交换膜的发展历程基础上,分别综述了制膜材料SPEEK的合成和SPEEK质子交换膜的制备研究进展,重点总结了SPEEK质子交换膜的电导率和阻醇性能及其稳定性的影响因素和影响规律,其中包括制膜材料和溶剂以及工艺、SPEEK的共混改性、SPEEK的填充改性或多层复合结构的影响,进而分析了高性能SPEEK质子交换膜的开发研究前景。
补充资料:聚醚酮酮
分子式:
CAS号:
性质:是在主链结构中含有两个酮键和一个醚键的重复单元所构成的高聚物,属特种高分子材料。具有耐高温、耐化学药品腐蚀等物理化学性能,是一类结晶高分子材料,熔点大于300℃,软化点168℃,拉伸强度132~148MPa,可用作耐高温结构材料和电绝缘材料,可与玻璃纤维或碳纤维复合制备增强材料。典型的结构通式为,一般采用与芳香族二元酚缩合而得的一类聚芳醚类高聚物。
CAS号:
性质:是在主链结构中含有两个酮键和一个醚键的重复单元所构成的高聚物,属特种高分子材料。具有耐高温、耐化学药品腐蚀等物理化学性能,是一类结晶高分子材料,熔点大于300℃,软化点168℃,拉伸强度132~148MPa,可用作耐高温结构材料和电绝缘材料,可与玻璃纤维或碳纤维复合制备增强材料。典型的结构通式为,一般采用与芳香族二元酚缩合而得的一类聚芳醚类高聚物。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条