1)  anionic-nonionic surfactant mixture
阴离子-非离子混合表面活性剂
2)  anionic/nonionic mixed surfactant
阴离子/非离子混合表面活性剂
1.
An anionic/nonionic mixed surfactant (mass ratio 7/3) in ≥30% aqueous solution, denoted as SB3, is evaluated in Laboratory for improving flowability of superheavy crude in tubing of steam huffpuff wells of faulted block reservoir Shan6 of Binnan, Shengli.
在实验室评价了质量比7/3的阴离子/非离子混合表面活性剂降粘剂SB 3(有效物含量≥30%)对胜利滨南油田单6断块蒸汽吞吐井超稠油井筒乳化降粘的性能。
3)  anion
阴离子
1.
Determination of ppb level anions in sulfolane by ion chromatography with a novel column-switching injection system;
离子色谱-柱切换进样抑制电导检测环丁砜中的杂质阴离子
2.
The application of anion exchange resins in anionic surfactant recovery in colloidal sheaf-increasing solution;
阴离子交换树脂对阴离子表面活性剂的回收
3.
Effects of Anions on OH Stretching Raman Spectra of Water;
阴离子对水的羟基伸缩振动拉曼光谱的影响
4)  anions
阴离子
1.
HPLC Determination of 7 Anions in Environmental Water;
高效液相色谱法测定环境水中7种阴离子
2.
Design and synthesis of novel tweezer anion receptors based on deoxycholic acid and molecular recognition properties for anions;
新型脱氧胆酸钳形阴离子受体的设计合成及其对阴离子的识别性能研究
3.
Simultaneous Determination of Nine Anions in Rainwater and Slush by Ion Chromatography;
离子色谱法同时测定降水中的9种阴离子
5)  polyanion
聚阴离子
1.
Poly(vinyl alcohol)(PVA)-based polyanion was prepared by esterification of PVA with sulfuric acid.
硫酸与聚乙烯醇(PVA)经酯化制备PVA聚阴离子电解质。
2.
Recent progress on the polyanion-type cathode materials for lithium ion batteries is reviewed.
综述了各种聚阴离子型锂离子电池正极材料的研究现状,重点对各种材料的结构和性能的关系,尤其是聚阴离子在正极材料中的作用,以及改善材料电导率的各种方法及其机理进行了总结和探讨。
6)  anionic
阴离子型
1.
This paper narrates the research situation of one-canwater-borne polyurethane coatings including anionic one-can water-borne polyurethane coatings, cationic one-can water-borne polyurethane coatings and modified one-can water-borne polyurethane coatings.
从阴离子型单组分水性聚氨酯涂料、阳离子型单组分水性聚氨酯涂料和改性单组分水性聚氨酯涂料三个方面分别阐述了单组分水性聚氨酯涂料近年来的研究概况。
2.
A kind of anionic thermo-sensitive hydrogel wit h high swelling ratio was prepared by the co-polyme- rization of N-isopropyl acrylamide (NIPA) monomer and 3-sulfopropyl acrylate potassium salt (SPAPS) wi th little amount in the presence of N,N-methylene-bisacrylamide (MBA).
以N -异丙基丙烯酰胺为单体与少量丙烯酸(3 -磺酸 )丙酯钾盐共聚 ,以N ,N -亚甲基双丙烯酰胺为交联剂 ,得到一种具有较大溶胀比的阴离子型温敏水凝胶 。
3.
Nanosized TiO2 was modified by water-based anionic hyperdispersant in order to obtain steady nanosized TiO2 aqueous suspension.
为制备稳定分散的纳米TiO2水悬浮液,采用自制的阴离子型水性超分散剂对纳米TiO2进行表面改性,使用红外、紫外、扫描电镜、沉降实验、黏度测试等方法对钛白粉的分散性进行表征。
参考词条
补充资料:磷酸酯型阴离子表面活性剂
分子式:
CAS号:

性质:磷酸酯型阴离子表面活性剂是含磷表面活性剂的一类。其中包括烷基聚氧乙烯醚磷酸酯盐及烷基磷酸酯盐。它们的结构如下: R为C8~C18的烷基,M为K、Na、二乙醇胺、三乙醇胺,n一般为3~5。具有良好的抗静电、乳化、防锈和分散等性能。作为纺织油剂、金属润滑剂等广泛应用于纺织、化工、金属加工等各部门。用醇和五氧化二磷制备烷基磷酸酯盐是工业生产上最常用的方法。为了研究磷酸酯的特性及特殊用途的需要,需采用其他方法制取纯度较高的磷酸酯。如用三氯氧磷制取单酯;用三氯化磷制取双酯。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。