1)  cylinder oil
汽缸油
1.
The common cylinder oil whose TBN is 40 mgKOH/g or 70 mgKOH/g can't meet the lubricating demands of engine for such high sulfur content fuel.
5%的燃料油,为满足使用该类燃料油的发动机润滑要求,需要使用更高碱值的船用汽缸油,100号船用汽缸油是目前国内外碱值最高的汽缸油产品。
2)  marine cylinder oil
船用汽缸油
1.
Taking HVI neutral oil from Xinjiang paraffin-base crude oil as base oil,and overbased calcium naphthenate as the main agent,with other additives,the developed DCA5070H marine cylinder oil with excellent performances at lab can meet the requirements of Q/SY RH2013-2001.
以新疆石蜡基原油生产的HVI中性油为基础油,以高碱值环烷酸钙为主剂并与其它添加剂复配,实验室研制出DCA5070H高性能船用汽缸油,达到Q/SYRH2013-2001质量要求。
2.
By using the intermediate base oil from Xinjiang and overbased calcium naphthenate as the main detergent additive,DCA5040 marine cylinder oil is produced.
利用新疆中间基中性油和高碱性环烷酸钙为主要清净剂研制出DCA5 0 4 0船用汽缸油 ,经理化测试分析和Bolnes 3DNL 170 / 6 0 0HF三缸发动机试验 ,其性能与国外大石油公司同类船用油质量水平相当 ,完全可满足燃烧高硫重质燃料油的远洋大型船舶对汽缸的润滑要
3.
The performances and technical indexes of 5070 marine cylinder oil were presented.
介绍 5 0 70船用汽缸油的性能及技术指标。
3)  residual cylinder stock
残余汽缸油
4)  filtered cylinder oil
过滤汽缸油
5)  synthetic steam cylinder oil
合成蒸汽汽缸油
1.
Through Improvement the production process of synthetic steam cylinder oil,after the reaction of main material saponated paraffin and chlorine gas,the terminal density(chlorine content) and polymerization oil's viscosity can be increased.
通过改进合成蒸汽汽缸油的生产工艺,一方面通过提高主要原料皂蜡和氯气反应的成槽密度即氯化率,从而提高缩聚油粘度,另一方面通过调整蒸馏过程中的工艺参数,得到高粘度,高闪点的塔底重组分,使之与低粘度,高闪点的烯烃合成油混兑,获得合格的合成蒸汽汽缸油,通过以上工艺改进,降低主要原料皂蜡的消耗定额,从而降低合成蒸汽汽缸油的生产成本。
6)  ammonia oil
氨压缩机汽缸油
参考词条
补充资料:汽缸油
分子式:
分子量:
CAS号:

性质:主要用于润滑蒸汽机汽缸的高粘度润滑油。根据使用条件可分为饱和汽缸油和过热汽缸油以及船用柴油机主机汽缸油。有时也根据粘度分为轻汽缸汪和重汽缸油。饱和汽缸油有11、24等号,用于饱和蒸汽机和负荷高、速度低的机械等[11号用于0.5兆帕(5个大气压),蒸汽温度在150℃;24号用于0.5-1.6兆帕(5-16个大气压),蒸汽温度在150-200℃]。过热汽缸油38、52、62等号,用于过热蒸汽机和负荷低、速度高的机械等。船用柴油机汽缸油加有碱性添加剂、浮游分散剂等多效添加剂,用于燃烧低级高硫燃料油的大型、低速、十字头式发动机的汽缸。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。