|
|
|
说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
|
|
|
1) shaving spline
刨花键
1.
A new and unique shaving spline fixture has been designed for splines couldn' t be processed or cylindrical surface.
针对在圆柱表面上刨床无法加工花键的不足，设计了一种新颖的刨花键夹具。
2) wood particles
刨花
1.
The article introduced drying method of wood particles, in order to provide basis for choosing a good drying method, improving drying quality of wood particles, and saving sources.
通过对刨花干燥方法的研究,为人们选择合理的干燥方法、提高刨花的干燥质量及节约能源提供依据。
3) Flake
[英][fleɪk] [美][flek]
刨花
1.
Interaction of Temperature and Moisture Content on Flake Compression Behavior;
温度与含水率交互作用对刨花压缩特性的影响(英文)
2.
Flakes with thickness of 0.
两工段定向刨花板(OSB)刨片制备的新工艺,不需要使用材质非常好的传统木材,能经济、高效地加工出用于生产定向刨花板的刨片。
4) particle
[英]['pɑ:tɪkl] [美]['pɑrtɪkḷ]
刨花
1.
Determination of Key Moisture Contents in Particle Drying Process;
刨花干燥工序关键含水率的确定
2.
Using the residues from wood conversion of Acacia and Eucalyptus species as material, the molded decorative particleboard products were manufactured by two-stage process and the relationship between process parameters and properties of products were studied in this paper.
以相思、桉树2树种的木材加工剩余物为原料,研究两步法刨花模压板的制造工艺以及各工艺参数与板材性能的关系。
3.
membranaceus Munro as materials, PF as adhesive and VAE as adhesive agent, the molded decorative particleboard products were manufactured by two-stage process and the relationship between process parameters and properties of products were studied in this paper under lab conditions.
本论文是以相思木、桉树、云南龙竹、黄竹四种材料的加工剩余物为主要原料，酚醛树脂(PF)为胶粘剂，醋酸乙烯—乙烯共聚乳液(VAE)为胶粘剂助剂，在实验室的条件下，采用“两步法”刨花模压工艺方法对材料进行模压，研究四种材料模压性能以及工艺参数和模压制品性能间关系的变化规律。
5) chip
[英][tʃɪp] [美][tʃɪp]
刨花
1.
The measurement of chip moisture content(MC),based on capacitance,was researched.
研究了基于电容原理测定刨花含水率的方法。
6) wood particle
刨花
1.
Influencing factors in the convective drying of wood particles;
影响刨花对流干燥的因素分析
2.
Mathematical modeling of moisture and heat transfer in wood particles during convective drying.
刨花对流干燥过程的数学模拟
3.
The drying of wood particle is an important procedure in the production of particle board.
木材刨花的干燥,是刨花板生产中的一个重要工序之一。
补充资料：UG自定义右键弹出菜单和快捷键
UG的右键弹出菜单包含了一些我们常用的功能，比如Roate、Fit等，为了使用的更加方便，我们也可以自己打造！打开UG安装目录下的UGII下的menus文件夹，里面包含了一些*.men和*.tbr，我们以文本方式打开它，发现也不难理解。例如，我们想在右键弹出菜单里面的roate和pan之间加入如图示的view下的orient功能，首先我们打开ug_main.men,查找orient，会看到下面的内容：
BUTTON UG_VIEW_REFRESH
LABEL &Refresh
BITMAP refresh_window.bmp
ACCELERATOR F5
ACTIONS STANDARD
CASCADE_BUTTON UG_VIEW_EDIT
LABEL O&peration
BUTTON UG_VIEW_ORIENT
LABEL Ori&ent...
ACTIONS STANDARD
参考上面部分我们会看出快捷键的定义是*ACCELERATOR来指定的，我们把红色部分即BUTTON UG_VIEW_ORIENT的LABEL下面加入一行ACCELERATOR Ctrl+Alt+O(这里可以自行定义，但不要和别的重复)，保存，这样我们就把快捷键定义好了，然后我们选中红色部分复制。接着打开ug_view_popup.men，它就是右键弹出菜单的定义文件。为了把它放在roate和pan之间，我们把刚才复制的部分粘贴在下面图示的位置：
TOGGLE_BUTTON UG_VIEW_POPUP_ROTATE
LABEL R&otate
BITMAP rotate.bmp
ACCELERATOR F7
ACTIONS STANDARD
BUTTON UG_VIEW_ORIENT
LABEL Ori&ent...
ACCELERATOR Ctrl+Alt+O
ACTIONS STANDARD
TOGGLE_BUTTON UG_VIEW_POPUP_PAN
LABEL &Pan
BITMAP pan.bmp
ACCELERATOR F9
ACTIONS STANDARD
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条
|