1) electric Manganese Silicon alloy furnace
锰硅合金电炉
1.
Based on production data on 30 MVA electric Manganese Silicon alloy furnace, influence of secondary voltage, secondary current, ternary alkalinity, Silicon slag charge and iron tapping number on production quota was analyzed with multivariated linear regression function and Gauss least square method.
根据 30 MVA锰硅合金电炉实际生产数据 ,利用多元线性回归方程与高斯最小二乘法 ,分析了二次电压、二次电流、三元碱度、硅渣配加量、出铁次数对生产综合指标的影响情况 ,通过分析 ,分清了影响因素的主次 ,并据此提出了电炉的合理操作建议。
2) ferromanganese-silicon furnace
锰硅电炉
1.
It discusses the advantage and disadvantage of the reactive compensation mode of ferromanganese-silicon furnace.
论述了锰硅电炉无功补偿方式的优缺点,开发了锰硅电炉低压无功补偿集散控制系统。
3) silicon-manganese alloy
硅锰合金
1.
Rapid analysis of silicon,phosphorus and manganese contents in silicon-manganese alloy;
硅锰合金中硅、磷、锰的快速分析
2.
Dissolving sample with nitric acid and hydrofluoric acid,the silicon content of silicon-manganese alloy was made a measurement with ICP-AES method in the hydrofluoric acid-resistant spray devices.
用硝酸和氢氟酸溶解试样,采用耐氢氟酸雾化装置,用ICP-AES法测定硅锰合金中的硅。
4) MnSi alloy
硅锰合金
1.
Experimental research on cold bonding briquette of MnSi alloy powder with adding manganese ore fines;
硅锰合金粉料添加富锰矿粉冷固结压块试验研究
2.
An experimental research on the cold bonding briquette of MnSi alloy powder materials by using different kinds of adhesives is carried out.
通过使用不同的粘结剂对硅锰合金粉料进行冷固结压块的试验,确定了最佳的硅锰铁压块配料方案,使原本难以再利用的硅锰合金粉料压成符合炼钢要求的成品块,在低成本的条件下为硅锰合金粉料这种二次资源以及其他类似资源的合理再利用找到了新的途径。
5) ferromanganese-silicon
锰硅合金
1.
It introduces the ideas of determining the craft restriction parameters firstly,and then calculating the burdening proportion,in order to optimize manganese ore mixture during the process of ferromanganese-silicon production.
介绍了在锰硅合金生产中,入炉锰矿的优化搭配采取先确定工艺参数后计算配比的配料计算思路,以及利用穷举法求解非线性函数的计算机软件实现过程。
2.
The paper introduces the state of sulphur content changing in accordance with raw material's when production furnace ferromanganese-silicon.
介绍了电炉生产锰硅合金时,合金中硫含量随所用原料硫含量变化的情况。
3.
It analyses the behavior of remained ferroalloy in smelting process, proves that taking use of remained ferroalloy process notonly can greatly improve technological economic indexes in smelting high carbon ferromanganese and ferromanganese-silicon, but also can raise the productivity of furnace.
通过留铁法在冶炼过程中的行为实践分析,证明留铁法冶炼高碳锰铁和锰硅合金不仅大大地改善了技术 经济指标,而且提高了电炉的生产能力。
6) silicomanganese
[,silikəu'mæŋɡəni:s]
锰硅合金
1.
It introduces the production control of low phosphorus and low carbon high silicon silicomanganese and the measures and crafts requirement of decreasing phosphorus and carbon.
论述了低磷低碳高硅锰硅合金的生产控制和降磷降碳措施以及工艺要求。
2.
Silicochrome furnace can be transferred to produce silicomanganese.
通过对硅铬电炉和锰硅电炉参数、冶炼原理的分析,以及正确的生产过程控制,硅铬电炉在不改变参数的情况下,可以转产锰硅合金,技术指标较好。
3.
Due to the technical reformation and enlarging the smelting intensity, the set of 30MVA silicon-manganese submerged arc furnace and the dry gas cleaning system has increased the output of silicomanganese, thus, the gas maximum temperature has risen from 650℃to 950℃, and the gas volume has increased by 80%.
30 MVA锰硅矿热炉及其煤气干式净化系统由于技术改造增大冶炼强度提高了锰硅合金的产量,导致煤气最高温度从原设计的650℃提高到950℃,煤气量增加了80％。
补充资料：硅锰合金
硅锰合金即是硅锰。
（1）概念：硅锰合金是由锰、硅、铁及少量碳和其它元素组成的合金，是一种用途较广、产量较大的铁合金。硅锰合金是炼钢常用的复合脱氧剂，又是生产中，低碳锰铁和电硅热法生产金属锰的还原剂。硅锰合金可在大、中、小型矿热炉内采取连续式操作进行冶炼。
（2）硅锰在国内西南地区较多，云南、贵州、广西、湖南。生产硅锰合金的原料有锰矿、富锰渣、硅石、焦炭等。
（3）常见牌号：FeMn68Si18FeMn65Si17FeMn60Si14
（4）原料：锰矿、富锰渣、焦炭、硅石、石灰等.
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条